Overview
The California Super Trucks Component Box is a lift kit component set for an 8-10 inch lift. It includes torsion mounts, a bumpstop and hardware, and it carries a direct fit label from California Super Trucks.
Hardware is included with the set. Check the package contents against your installation before starting.
Key features
- 8-10 inch lift
- Torsion mounts included
- Bumpstop included
- Hardware included
Before you install
Lift components such as torsion mounts and bumpstops change how the suspension moves, so installation is more than bolting parts in place. Torsion mounts set the height of the suspension while bumpstops limit how far the axle can travel before contact. Check each part’s clearance against tires, brake lines and driveshaft angles once the lift is complete.
Hardware often gets replaced during a lift because it is torqued once and then stressed on every trail run. Re-check fasteners after the first few drives and inspect rubber parts for cracks. Keep the old mounts and bumpstops until the new set is fitted and measured. Alignment and steering geometry should also be measured afterward, because ride height shifts when the kit changes the suspension.
Specifications
| Brand | California Super Trucks |
|---|---|
| UPC | 70000622092 |
| Lift height | 8-10 in |
| Included components | Torsion mounts, bumpstop, hardware |
| Fitment | Direct fit (per California Super Trucks) |
Vehicle fitment
Verify the year, model and trim against your truck before ordering. Torsion mounts and bumpstops affect suspension travel and ride height, so measure clearance once the lift is installed.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torsion mounts and bumpstops limit suspension travel and affect ride height, so check clearance after the lift is complete.
What’s included
Torsion mounts, a bumpstop and hardware are included. Not included: Any other lift kit components are not part of this box.



