Overview
The California Super Trucks Component Box 1 of 3, part number CSS-C3-18-B1, is the first box in a component set for a 3-6 in. lift. It is marked as including a 1 in. rear kit, and California Super Trucks gives part number CSK-C3-18-1 for the complete kit.
It can return the vehicle to stock height. It is built without welding, with UPC 700008189531.
Key features
- Box 1 of 3 in the CSS-C3-18 component set
- It can return the vehicle to stock height.
- Durable black powder coat finish
- Built without welding
- Constructed of 1/4 in. steel
- Stablitrak compatible, 100 percent
Boxes and lift height
A box in a multi-part component set works with the other boxes, the rear kit and the complete kit, so it should be installed in its numbered sequence. Confirm the set’s lift range before you start, because the 3-6 in. range sets the geometry the parts were made around. Mixing boxes from different sets can leave brackets that do not line up.
Steel boxes with powder coat need some care. Inspect the coating for chips at mounting faces, and touch them up with a matching paint so rust cannot spread under the finish. With no welding, the bolts carry the load, so check fastener torque after the first drives and again after rough terrain.
- Keep box numbers and kit numbers recorded together
- Touch up chips in the powder coat at mounting faces
- Recheck bolt tightness after the first few drives
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-C3-18-B1 |
| UPC | 700008189531 |
| Position in set | Box 1 of 3 |
| Lift range | 3-6 in. |
| Material | 1/4 in. steel |
| Finish | Black powder coat |
| Construction | No welding |
| Compatibility | Stablitrak, 100 percent |
| Included | 1 in. rear kit |
| Complete kit part number | CSK-C3-18-1 |
Vehicle fitment
Confirm which vehicles the complete kit, CSK-C3-18-1, covers before ordering this box.
A component box must match its kit and lift height, so confirm the kit first. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this is box 1 of 3, the set also relies on boxes 2 and 3 (CSS-C3-18-B2 and CSS-C3-18-B3) and the complete kit under CSK-C3-18-1. Lift the vehicle and support it on stands before working on any suspension component.
What’s included
The box is marked as including a 1 in. rear kit.
Not included: boxes 2 and 3 of the set and the complete kit under part number CSK-C3-18-1.



