Overview
The Fabtech FTS21231 is Component Box 2 of 2, a boxed part for Fabtech’s 4 in. lift kits. It is one piece of a multi-part set, and it is named for kit numbers K1121, K1123, K1121M, K1123M, K1121DL, K1122DL, K1124DL and K1123DL.
Match the kit number on your lift kit to this box before adding the other components to your build.
Key features
- Box 2 of 2 in a multi-box Fabtech component set
- Designed for 4 in. lift applications
- Named for eight Fabtech kit numbers
- Brand Fabtech, part number FTS21231
Fitting the box into a set
A box that is one of several in a set works only when the whole set is correct, so it pays to check the kit number before any part is removed from the vehicle. Keep the old box and new box side by side and compare mounting holes, bracket angles and the finish. A close match is not the same as a correct match.
Components that carry load should be inspected after installation and during routine service. Look for loose fasteners, cracked welds, coating that has chipped at contact points, and any sign of movement at the bushings. Address small issues early, because a bracket that shifts under load can change alignment across the whole set.
- Compare old and new boxes before removal
- Check bushings and fasteners after installation
- Address chipped coating at contact points promptly
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS21231 |
| UPC | 674866104365 |
| Lift height | 4 in. |
| Box position | Box 2 of 2 |
| Kit numbers | K1121, K1123, K1121M, K1123M, K1121DL, K1122DL, K1124DL, K1123DL |
| Category | Suspension > Lift Kit-Suspension Component |
Vehicle fitment
Fit depends on the kit this box belongs to, not on the box alone.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Review the hardware you have against the installation steps before starting.
Not included: The other component boxes and lift kit parts needed to complete the set.









