Overview
The Centerforce clutch alignment tool 53010 (part number 53010) is a black plastic tool used to line up a clutch disc during installation. It fits 1966 to 2007 Wrangler and CJ vehicles and 1-1/8 in. clutch discs with 10 splines.
Centerforce describes its alignment tools as standard black plastic tools, and one tool can be used for many installations on the same application.
Key features
- Black plastic construction
- Fits 1-1/8 in. x 10 spline clutch discs
- One tool can be reused for many installations on the same application
- Fitment table lists universal fit with 10 splines and nose diameter N/A
Using an alignment tool
An alignment tool holds the clutch disc centered on the transmission input shaft while the pressure plate bolts are tightened. A centered disc lets the input shaft slide through the hub without binding, and it helps the pressure plate load evenly. Without centering, the disc can sit off-axis and cause vibration, poor release or early wear on the friction material.
Check the tool for cracks, chipped edges or a worn tip before each use, since plastic tools can deform after heavy use. Wipe the tool clean so grit does not scratch the disc hub. Insert it fully through the disc and into the pilot bearing, then tighten pressure plate bolts in a crisscross pattern. Remove the tool carefully so it does not drag the disc out of position. Keep the tool with the clutch parts for the next job.
Specifications
| Brand | Centerforce |
|---|---|
| Part number | 53010 |
| UPC | 788442022957 |
| Material | Black plastic |
| Spline count | 10 splines |
| Clutch disc fit | 1-1/8 in. x 10 spline |
| Nose diameter | N/A |
| Fitment | Universal fit, with 1966 to 2007 Wrangler and CJ applications |
Vehicle fitment
It fits 1966 to 2007 Wrangler and CJ vehicles. Wrangler generations and CJ models are not separated, so confirm your exact model and year before use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the tool with the clutch disc to center it on the transmission input before the pressure plate is bolted down.
What’s included
The item is the alignment tool only. A clutch disc and pressure plate are not included.
Not included: clutch disc and pressure plate.









