Overview
The B&W Trailer Hitches Silencer Pad, part number TS35025, is an anti-rattle pad for the connection between a steel receiver and a steel hitch. It is designed to keep the two steel parts from rattling against each other.
No pad dimensions, thickness or receiver sizes are given. Universal Fit is the only fitment given, so this pad is not tied to any named vehicle.
Key features
- Cushions the steel receiver from the steel hitch
- Helps eliminate rattle
- Listed under receiver anti-rattle accessories
- Manufactured using advanced techniques, per the brand
Setting up the anti-rattle pad
A silencer pad works best when it is set cleanly between the receiver and hitch with no debris trapped in the joint. Before installing, wipe both steel surfaces, check that the pad sits flat, and confirm it is in the position it is meant to occupy. Seating it correctly matters more than the force used to tighten the hardware.
Because the pad carries load every time you tow, inspect it with the hitch at regular intervals. Look for uneven compression, cracking, or shiny spots where metal is rubbing through. Rattle that is ignored can wear the steel parts, so address movement early. Reseat or replace the pad when the joint feels loose.
- Clean both steel surfaces before fitting
- Check the pad seats flat between the parts
- Inspect for uneven compression or cracks
Specifications
| Brand | B&W Hitch |
|---|---|
| Part number | TS35025 |
| UPC | 843233004137 |
| Product type | Receiver anti-rattle silencer pad |
Vehicle fitment
Universal Fit is the only fitment given, and no vehicle years, models or trims are named. Fit depends on the receiver and hitch, so measure those first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Place the pad between the steel receiver and steel hitch as the cushion is designed to sit, and check its position before towing.
What’s included
The package contains one silencer pad only.








