Overview
The Bestop Trailmax II Sport Recliner Seat in black, part number 39438-15, is a front reclining seat with a built-in headrest for Jeep Wrangler and CJ models. It has a black denim vinyl covering and a full fabric front, and the recliner dial can be mounted on either side for driver or passenger use.
The TrailMax II line is built for comfort on the road and support on the trail. It uses Variable Rate of Resistance springs, a high density closed cell foam cushion that keeps its shape, and an Atlas Frame that resists corrosion. The premium vinyl is mildew resistant and holds its shape in any temperature. Several Wrangler generations need separate adapter brackets, covered below.
Key features
- Rotary recliner dial mounts to either side of the seat for driver or passenger side use
- Built-in headrest
- Elastic mesh map pocket on the back of the seat for handy storage
- Black denim vinyl covering with a full fabric front
- Variable Rate of Resistance springs for comfort on the road and support on the trail
- High density closed cell foam cushion that Bestop says keeps its shape for years
- Atlas Frame that Bestop describes as sturdy and corrosion resistant
- Vinyl that is mildew resistant and available in factory original colors.
Trail use and springs
Recliners built for Jeep use need springs and a frame that handle both road travel and rough ground. The springs absorb impacts from washboard roads and sudden stops, while the frame keeps the seat steady when the vehicle leans or rolls. Choose a seat whose frame and mounting plan suit your model year before adding any extras.
Trail use is hard on any reclining mechanism. Dirt, sand and water collect around the joints, so rinse the seat after muddy outings and dry the mechanism completely. Inspect the frame bolts and adapter brackets after rough trips, and replace worn bushings before they allow play in the seat.
- Rinse and dry after muddy trips
- Inspect frame bolts after rough runs
- Watch for play in the recline joints
- Keep the seat dry when stored
Specifications
| Brand | Bestop |
|---|---|
| Part number | 39438-15 |
| UPC | 77848028077 |
| Seat type | Reclining |
| Seat location | Front |
| Position | Front |
| Color | Black |
| Fitment | Direct fit |
| Upholstery | Black denim vinyl with full fabric front |
| Frame | Atlas Frame |
| Built-in headrest | Yes |
| Map pocket | Elastic mesh, on back of seat |
| Adapter brackets, 1997–2002 | 51256-01, one per seat |
| Adapter brackets, 2003–2006 | 51245-01 (driver side) and 51248-01 (passenger side) |
Vehicle fitment
The manufacturer fitment list for this seat covers the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade), the 2004–2006 Jeep Wrangler (LJ) (Unlimited, Unlimited Rubicon), the 1997–2006 Jeep Wrangler (TJ) (65th Anniversary Edition, Rubicon, SE, Sahara, Sport, X) and the 1987–1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport).
The list does not include the 2007 and newer Wrangler (JK) or Wrangler (JL), the Jeep Gladiator, or Cherokee and Liberty models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Wrangler applications from 1997 to 2002 need seat adapter bracket 51256-01 for each seat. Wrangler applications from 2003 to 2006 need bracket 51245-01 for the driver side and bracket 51248-01 for the passenger side. Check the bracket requirement for your model year before fitting the seat.
What’s included
The package covers the seat itself. Check the package contents against your installation before starting.
Not included: Seat adapter brackets 51256-01, 51245-01 and 51248-01, which Bestop states are required for the 1997–2002 and 2003–2006 Wrangler applications.









