Overview
The Bestop Tailgate Bar Kit, part number 52602-01, is a black steel tailgate retainer bar kit for the Trektop Classic soft top on 2004–2006 Jeep Wrangler Unlimited (LJ) and 1997–2006 Jeep Wrangler (TJ) models. It replaces a lost or missing tailgate retainer bar and comes with the mounts and hardware needed to hold the soft top at the tailgate.
Retainers are a common loss on TJ soft tops. Bestop designs this kit for the Trektop Classic soft top only. Owners of other Bestop soft tops on a 1997–2006 TJ are directed to Bestop part 52600-01 instead.
Key features
- Black finished steel construction resists corrosion and scratches.
- Integrated durable rubber seal.
- Two retainer mounts with mounting screws that use the factory hole locations.
- Velcro strip attachment included.
Keeping the retainer secure
On a soft top, the tailgate retainer bar keeps the rear edge of the top tight against the tailgate. When it is missing, wind and rain can lift the rear corner and let water collect at the seam. Replacing it promptly keeps the top fitted and reduces stress on the zipper and the fabric near the tailgate.
Retainer mounts often wear where they grip the body, so inspect the mounting screws each time the top is installed. Clean the seal area before refitting, and avoid overtightening the screws, which can crack the mounting point. If the Velcro attachment loses grip, replace it rather than adding extra strips.
- Keep a spare set of mounting screws in the glovebox
- Check the Velcro strip for worn hook edges
- Recheck tension after the first highway drive
Specifications
| Brand | Bestop |
|---|---|
| Part number | 52602-01 |
| UPC | 77848090029 |
| Material | Steel |
| Finish | Black, finished |
| Soft top type | Trektop Classic |
| Included hardware | Two retainer mounts, mounting screws, Velcro strip |
Vehicle fitment
It fits 2004–2006 Jeep Wrangler Unlimited (LJ), in the Unlimited and Unlimited Rubicon trims, and 1997–2006 Jeep Wrangler (TJ), in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Only the years, models and trims named above are covered, so a 2007–2018 Wrangler JK or 1987–1995 Wrangler YJ needs a fit check first.
Installation notes
The retainer mounts fasten with the supplied screws at the factory hole locations, and the Velcro strip completes the attachment. Make sure your soft top is a Trektop Classic before fitting, since this kit is designed for that top only.
What’s included
Tailgate retainer bar, two retainer mounts, mounting screws, integrated rubber seal and Velcro strip attachment.









