Overview
The BedRug XLT Mat, product name XLTBMQ15SCS, is a polypropylene truck bed mat for trucks with an existing spray-in liner or no bed liner. It lays over the bed floor to give a flat, cushioned work surface and help guard the bed against dents and impact.
The top layer is 100% polypropylene and ultra tough. It is flat, slip and skid resistant, and it fills the ribs and contours of the bed for a smooth, void free loading area. A 3/4 in padded under layer sits beneath it, and that foam does not absorb water.
The mat handles everything from mulch to bleach, and its polypropylene is fade and UV resistant. Water runs off the surface and out the factory drain holes, and the bed dries in as little as 20 minutes. The integrated tailgate gap guard hinge covers the gap between bed and tailgate, keeping debris from building up between the two pieces.
Key features
- Ultra-tough 100% polypropylene top layer
- Slip and skid resistant, flat work surface
- Cushioned 3/4 in padded under layer that is knee friendly
- Integrated tailgate gap guard hinge
- Fills the ribs and contours of the bed for a void free surface
- Bleach, battery acid, oil and gas wash right off
- Will not absorb water; fade and UV resistant
Bed mats and existing liners
A bed mat sits on top of the floor rather than bonding to it, which makes it a practical choice for a truck that already has a spray-in liner or no liner at all. The mat adds a flat, cushioned surface for tools and gear, and the raised contour of the bed is filled so loads do not catch on the ribs.
Before fitting, clear the bed of debris and check that the tailgate hinge moves freely. Grit trapped under any mat can wear the surface over time, so lift it periodically and sweep the floor. Keep the hook and loop fasteners clean, since dirt reduces their hold.
- Sweep the bed before each install
- Check hinge and tailgate movement
- Inspect fasteners after rough trips
Specifications
| Brand | BedRug |
|---|---|
| Product | XLT Mat (product name XLTBMQ15SCS) |
| Part number | XLTBMQ15SCS (product name code) |
| UPC | 870558005853 |
| Top layer | 100% polypropylene |
| Underlayer | 3/4 in padded foam |
| Attachment | Hook and loop fasteners |
| Hinge | Integrated tailgate gap guard hinge |
| Fit | Made to fit a specific make and model; vehicles not named |
Vehicle fitment
This mat is made to fit a specific make and model. Confirm your truck’s make, model, year and bed before ordering.
Confirm your truck’s make, model, year and bed before ordering.
Installation notes
The mat fastens with hook and loop fasteners and needs no sanding, prepping or drill holes. The bed piece and tailgate piece are joined by the integrated hinge.
What’s included
The mat is supplied as a bed piece joined to a tailgate piece through the integrated hinge. Check the package contents against your installation before starting.





