Overview
The Dee-Zee Bed Mat/Skid Mat, part number DZ87006, is a custom-fit rubber truck bed mat for the 2015–2018 Ford F-150 in the King Ranch, Lariat, Platinum, SSV, XL and XLT trims.
The mat covers the bed floor and contours around the wheel wells, so it sits close to the bed sides and leaves little room for cargo to slide. Because the contour follows the bed, the mat covers the full floor rather than leaving corners open. Dee-Zee designed it to protect the bed surface from scratches, dings and dents, and its raised rubber cleats help keep tools, coolers and other loose gear from shifting while you drive.
Loose items rolling around a truck bed can damage the truck and cost time chasing things down. A mat that holds loads in place helps on both counts. The mat is heavy-duty and made in the U.S.A., and it carries a limited-lifetime warranty.
Key features
- Extra thick .375 inch (9.52mm) rubber compound construction.
- Rubber cleats on the underside help keep the mat in place and let water drain.
- Highly compressed rubber resists abrasions and tears.
- Stated not to rust, crack or break, even in extreme temperatures.
- Resists common fuel and oil spills, and the rubber deflects UV rays to reduce fading.
- Contours around the wheel wells for a custom fit; trimming may be required for short bed applications.
Short bed and trimming
Trimming is the step most owners weigh before fitting a rubber bed mat. If your bed is shorter, lay the mat in the bed with the wheel well contours seated first and mark where it meets the tailgate. Cut slowly with a sharp utility knife, working in small passes, since rubber can tear if forced.
Rubber cleats keep a mat from creeping, but they only work when the underside sits flat on the bed floor. After a trim, check that no cut edge catches on the wheel wells or the tailgate hinge area. A clean, dry bed floor also helps the cleats grip.
Consider how cargo sits on top of the mat. Tools, coolers and bags can slide toward the tailgate, so arrange heavier items near the cab. Clean the mat regularly, and replace it if the cleats wear flat or the rubber cracks along a cut edge.
Specifications
| Brand | Dee-Zee |
|---|---|
| Part number | DZ87006 |
| Material | Rubber compound |
| Thickness | .375 inch (9.52mm) |
| Fit | Custom contoured around wheel wells |
| Trimming | May be required for short bed applications |
| Tailgate mat | Sold separately |
| Warranty | Limited-lifetime |
| Origin | Made in U.S.A. |
Vehicle fitment
The mat fits the 2015–2018 Ford F-150 in King Ranch, Lariat, Platinum, SSV, XL and XLT trims.
Other Ford F-150 model years and other Ford trucks are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Short bed owners should expect that trimming may be required, so test-fit the mat in the bed before cutting anything. The rubber cleats on the reverse side hold the mat in place once it is seated against the wheel wells.
What’s included
A rubber bed mat, part number DZ87006.
Not included: The tailgate mat, which is sold separately.








