Overview
The BD Diesel intercooler hose clamp kit, part 1045215, replaces factory intercooler hoses and clamps on 2003–2007 Dodge Ram 2500 and Ram 3500 trucks. As boost increases, factory clamps and hoses can exceed their clamping range, and the Nomex silicone hoses with T-clamps are designed to prevent failures.
The kit contains eight stainless steel T-clamps and four Nomex silicone hoses, and it is designed to replace the factory hoses and clamps.
Key features
- 8 stainless steel T-clamps
- 4 Nomex silicone hoses
- Replacement for factory intercooler hoses and clamps
- Designed for higher boost levels
Signs of a boost leak
A boost leak usually shows up as a loss of power under load, a hissing or whistling sound during acceleration, or a boost reading that drops faster than normal. Because the intercooler piping runs under the hood where heat and vibration are constant, rubber hoses and clamps are the most common failure points. Oil residue or dark soot around a joint often marks a spot where air has been escaping.
When the kit is installed, check each joint by hand after the first few heat cycles. Clamps can settle as the hoses warm and cool, so a quick retightening can prevent a leak from growing. Keep the intake tube and the cooler mounts in view during the first drives, since any movement can stress a joint that was tight when it was installed.
- Listen for hissing under throttle
- Check joints for oil or soot
- Retighten clamps after heat cycles
Specifications
| Brand | BD Diesel |
|---|---|
| Part number | 1045215 |
| UPC | 19025003705 |
| Clamp count | 8 |
| Clamp material | Stainless steel |
| Hose count | 4 |
| Hose material | Nomex silicone |
Vehicle fitment
The manufacturer fitment list covers 2003–2007 Dodge Ram 2500 (Laramie, Power Wagon, SLT, ST, Sport, TRX4) and Ram 3500 (Laramie, SLT, ST, Sport, TRX4) trucks.
Ram 1500 models and 2008 and later Ram trucks are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the kit replaces the factory hoses and clamps, plan to remove the original parts before fitting these.
What’s included
Eight stainless steel T-clamps and four Nomex silicone hoses.









