Overview
The BD Diesel Performance Fuel Injector Set, part number 1040295, is a set of six diesel injectors with a new nozzle design. The nozzle enhances both fuel flow and atomization.
The set is a performance replacement with a listed horsepower increase of 60. Exchange is not required, and the set carries a Direct Fit entry without any named vehicle years, makes or models.
Key features
- Six injectors per set
- New nozzle design that enhances fuel flow and atomization
- Listed horsepower increase of 60
- Legal for use in 49 states.
Preparing the injector bores
Fuel injectors seal against the cylinder head or injector bore, and that seal is only as good as the surface beneath it. Before fitting new injectors, clean the bores and remove any carbon or old sealant. Inspect the seats for scoring, since a damaged seat can leak combustion pressure or allow fuel to pass in the wrong place.
Because a new nozzle design changes how fuel is sprayed, it pays to confirm the injectors are seated fully and the hold-downs are even. Replace the seals and gaskets rather than reusing old ones. Keep the work area clean, cap the lines during the job and check for leaks by running the engine briefly before the final road test.
- Clean injector bores and seats
- Install new seals and gaskets
- Check hold-down clamps for even seating
- Look for leaks after a short test run
Specifications
| Brand | Bd Diesel |
|---|---|
| Part number | 1040295 |
| UPC | 19025006188 |
| Injector type | Diesel injector |
| Quantity | 6 |
| Fuel type | Diesel |
| Replacement type | Performance replacement |
| Horsepower increase | 60 |
| Exchange required | No |
| Gaskets included | No |
| State legal | 49 state |
Vehicle fitment
The set carries a Direct Fit entry, but no vehicle years, makes or models are named. Confirm the injectors against your engine’s specifications before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gaskets are not included, so new gaskets must be sourced before the injectors are fitted. Injector work involves pressurized fuel, so relieve fuel system pressure before removing the stock injectors.
What’s included
Six injectors per set.
Not included: Gaskets.









