Overview
The ACCEL 150119 is a performance replacement fuel injector rated at 19 lbs./hr. flow for gasoline fuel. It is marked Universal Fit, though no specific vehicle, year or engine is identified for it.
Confirm the application for your engine before installing the injector.
Key features
- Performance replacement injector
- 19 lbs./hr. flow rate
- Gasoline fuel type
- Universal Fit marking, with no specific vehicles identified
Sizing and injector care
Fuel injectors spray a metered amount of fuel into the intake or cylinder each time the engine fires, so their flow capacity has to match the fuel pressure, engine load and tuning of the vehicle. A higher flow rate is only useful when the rest of the fuel system and engine calibration can support it. Before changing injectors, review the fuel rail, pressure regulator and any engine management settings that affect how much fuel is commanded.
Replacement injectors are usually installed with new O-rings and seals, since old seals can leak or harden after years of heat exposure. Inspect the injector bores and the fuel rail for debris, and keep the work area clean so that no dirt enters the fuel passages. Old injectors that show uneven spray, dripping, or a rough idle may be worn and are often replaced in sets.
- Replace O-rings and seals with each injector change
- Check fuel pressure after installation
- Watch for leaks at the fuel rail
- Clean the injector bores before fitting
Specifications
| Brand | ACCEL |
|---|---|
| Part number | 150119 |
| UPC | 743047800034 |
| Replacement type | Performance replacement |
| Flow rate | 19 lbs./hr. |
| Fuel type | Gasoline |
Vehicle fitment
No make, model, year or engine is identified for this injector, so confirm its application before buying. The Universal Fit marking does not confirm a match for a specific vehicle.
Check injector flow and application against your engine’s requirements.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fuel system work carries fire risk, so depressurize the fuel system and keep the engine off during injector replacement.









