Overview
The Banks Power 42142 is a Ram-Air intake system for 2006 and 2007 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 trucks, including the 2007 Classic models. It has a full-enclosure oil-type filter housing in black ABS plastic, an included inlet tube and a Ram Air inlet design. It is a Direct Fit kit.
The design centers on a large lifetime filter that needs fewer cleanings than other filters. An enclosed cold-air box keeps underhood heat out of the intake, while a giant outlet and streamlined internals improve airflow. The system flows up to 66% better than the factory intake and improves power and fuel economy. The replacement filter part number is GBE42138.
Key features
- Full-enclosure filter housing for an oil-type filter
- Ram Air inlet type with an enclosed cold-air box
- Large outlet and streamlined components for airflow
- Bellows section accommodates engine movement
- Replacement filter part number GBE42138
- Lifetime filter element.
- Built to avoid fault or error codes, Banks says
- Banks says each unit is triple validated before release
Filter service and airflow
An oil-type filter needs to be kept clean and lightly oiled to trap dirt without restricting flow. Over-oiling can send residue into the intake and onto the airflow sensor, so apply oil sparingly and wipe away any excess before reinstalling. Keep spare filter service products on hand so cleaning does not get delayed.
On a Ram Air layout, the inlet tube draws air from the front of the truck, so check the tube for cracks, soft spots and loose connections after rough use. Make sure the housing seals fully so unfiltered air cannot bypass the element. A clean, sealed system is the simplest way to keep the intake working as designed.
- Inspect the inlet tube for cracks at each oil change
- Oil the filter lightly and remove any excess
- Check housing seals after off-road use
Specifications
| Brand | Banks Power |
|---|---|
| Part number | 42142 |
| UPC | 801279421424 |
| Air inlet type | Ram Air |
| Intake type | Cold air |
| Filter housing type | Full enclosure |
| Filter type | Oil |
| Filter housing material | ABS plastic |
| Filter housing finish | Black |
| Intake tube material | ABS plastic |
| Inlet tube | Included |
| Replacement filter part number | GBE42138 |
| CARB status | 50 State, CARB E.O. # D-161-81 |
| Fitment | Direct Fit; 2006–2007 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 |
Vehicle fitment
The manufacturer fitment list names 2006 and 2007 Chevrolet Silverado 2500 HD and 3500 models, plus the 2007 Classic versions, in LS, LT and WT trims. It also lists 2006 and 2007 GMC Sierra 2500 HD and 3500 models, plus the 2007 Classic versions, in SL, SLE, SLT and WT trims.
Other model years, lighter-duty Silverado and Sierra trucks, and other GM models are not covered. Confirm fit for your truck’s year, model and trim before installing the kit.
Installation notes
As a Direct Fit kit for these trucks, it is intended to take the place of the factory intake assembly. The bellows is built to move with the engine, so route the tube with slack and keep it away from the frame and hot components. When a new filter is needed, the referenced replacement part number is GBE42138.
What’s included
The inlet tube is included. The replacement filter part number is GBE42138. Check the box contents on arrival to confirm whether a filter is included.









