Select your vehicle

BAKFlip MX4 Hard Folding Truck Tonneau Cover – 448307

BAK Industries

Shop Ford F-150 Tonneau Covers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 2004-2014 Ford F-150 and 2007-2008 Lincoln Mark LT Base
  • Flush-mount hard folding tonneau cover from the BAKFlip MX4 line
  • Part number BKI448307
  • Matte-finished cab corner caps, clamps and elevator bolts
  • Extended 5-year warranty

Description

Overview

The BAK Industries BAKFlip MX4 hard folding truck tonneau cover, part number BKI448307, fits the 2004-2014 Ford F-150 and the 2007-2008 Lincoln Mark LT. It is a flush-mount hard cover that closes over the truck bed and folds back when you need full access to the cargo area.

Hard folding tonneau covers keep rain, moisture and road debris out of the bed and keep tools and gear out of sight from the road. This MX4 is built for everyday use and harsh conditions, with a matte finish. The newer version adds matte-finished cab corner caps, clamps and elevator bolts, along with upgraded rails, prop rod clips and bumpers.

The MX4 suits owners who haul gear regularly and want a cover that stays in place on the bed. Its panels sit even with the bed when closed, giving the truck a cleaner profile than a raised cover. The pre-molded, die-cut bumpers absorb shock, and the cover carries an extended 5-year warranty from BAK Industries.

Key features

  • Flush-mount hard folding design
  • Matte-finished cab corner caps, clamps and elevator bolts
  • Pre-molded, die-cut, shock-absorbent bumpers
  • Secure prop rod clips for the folding panels
  • Upgraded rails and A-panel and B-side bumpers for a more complete matte-finish look
  • Extended 5-year warranty from BAK Industries

Before you install a folding cover

Installation on a flush-mount hard cover depends on how well the panels align with the bed rails. Before tightening anything, set the panels loosely, check that they sit even with the bed, and then tighten the clamps and elevator bolts in stages. Clean the rails first so grit does not sit under the seals. A bed free of loose items during setup makes alignment easier to judge.

Over time, prop rod clips, bumpers and latches deserve regular attention. Look for worn clips that let rods shift, cracked or flattened bumpers, and panels that sit unevenly. Retighten fasteners after the first few drives, since vibration can loosen them. A cover kept clean and square tends to seal better and stay quiet on the road.

Choosing between a flush and a raised style is a matter of appearance and clearance. Flush panels sit level with the bed, which can make the truck look tidy, while raised styles often leave more room for tall cargo. Consider the loads you carry most often before committing to one style.

Specifications

Brand BAK Industries
Product line BAKFlip MX4
Part number BKI448307
Type Hard folding truck tonneau cover
Mount Flush mount
Bumpers Pre-molded, die-cut, shock-absorbent
Finish Matte
Warranty Extended 5-year

Vehicle fitment

It fits the 2004-2014 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims, and the 2007-2008 Lincoln Mark LT Base. The Lincoln fit applies only to that model and its years.

The 2015-2020 F-150 and the Super Duty F-250 and F-350 are not covered. Confirm your truck’s model year and trim before ordering.

What’s included

Hardware, tools and any other items should be confirmed at purchase, so you know the box contents before you start.

SKU: BKI448307 Categories: ,

Fitment

VehicleYearsTrims
Ford F-1502004–2014FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT
Lincoln Mark LT2007–2008Base

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the BAK BKI448307 fit a 2004-2014 Ford F-150?

Yes. It fits the 2004-2014 Ford F-150 in several trims, including XL, XLT, Lariat, King Ranch and Platinum. The 2007-2008 Lincoln Mark LT Base is also covered. Confirm your exact model year and trim before ordering.

What is BAK Industries part number BKI448307?

BKI448307 is the part number for the BAKFlip MX4 hard folding truck tonneau cover, also written as 448307. Use the part number when comparing this cover with other MX4 part numbers, since panel and fitment details can differ between them.

Is this a soft or a hard tonneau cover?

It is a hard folding cover. Rigid panels fold back to open the bed, while soft covers use fabric or vinyl. This MX4 is heavy-duty and all-season, built for extreme conditions and everyday use.

Is mounting hardware included with the MX4?

Check the package contents against your installation before starting. Have any clamps, bolts or tools you need ready before you begin, and confirm the full box contents at purchase.

How do I know when the seals need replacing?

Look for water inside the bed after rain, visible gaps along the rails, or seals that are cracked, flattened or pulling away. Replacing a worn seal early keeps the bed dry and helps the panels close evenly.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford F-150 Tonneau Covers on Amazon