Overview
The Auto Ventshade 94407 is a smoke Ventvisor side window deflector. It is a direct fit for the 2005–2018 Nissan Frontier. Ventvisors are rain guards that mount on the outside of the door glass so a window can stay open for fresh air while rain stays out.
This is Auto Ventshade’s original Ventvisor design in a smoke finish, sold as a four-piece set. The deflectors help reduce heat build-up in the cab, and windows can be left partially open while they are in place.
Key features
- Keeps rain out while fresh air comes in
- Original Ventvisor design from Auto Ventshade
- Helps reduce heat build-up in the cab
- Windows can be left partially open
- Mounts with pre-applied 3M adhesive foam tape, no drilling
- Smoke finish, four pieces
- Limited lifetime warranty
Rain guards and airflow
A side window deflector lets the glass open a little for airflow while keeping rain and spray out of the cab. On a truck, that matters most on wet days and during warm weather, when a cab can heat up quickly with the windows closed. Deflectors work best when they sit evenly along the top of the glass and do not touch the window seal.
Check the deflectors after a few weeks of driving, especially after car washes or high-speed highway runs, since wind can lift an edge that was not fully pressed down. Clean the glass around the deflector to keep the tape bonded, and avoid pulling on the deflector to adjust its position.
- Keep the deflector clear of the window seal
- Check edges after car washes
- Clean glass around the tape line
Specifications
| Brand | Auto Ventshade |
|---|---|
| Part number | 94407 |
| UPC | 725478076745 |
| Product type | Side window deflector (Ventvisor) |
| Finish | Smoke |
| Quantity | 4 pc. |
| Mounting | 3M adhesive foam tape, no drilling |
| Warranty | Limited lifetime |
Vehicle fitment
It is a direct fit for the 2005–2018 Nissan Frontier in Desert Runner, LE, Nismo Off-Road, PRO-4X, S, SE, SL and SV trims.
Frontier model years outside 2005 to 2018 are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The deflectors are held by pre-applied 3M adhesive foam tape along the window, so no drilling or extra hardware is needed. Adhesive tape generally needs a clean, dry mounting surface, so prep the glass and frame before pressing it on.
What’s included
Four smoke Ventvisor pieces with 3M adhesive foam tape for mounting.








