Select your vehicle

Aries Offroad TrailChaser Winch Reinforcement Bracket – 2072102

Aries Offroad

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Aries Offroad TrailChaser winch reinforcement bracket, part number ARS2072102
  • Required for mounting a winch on TrailChaser aluminum front bumpers
  • Fits 2018-2026 Jeep Wrangler JL and 2020-2026 Jeep Gladiator
  • Rated for a weight capacity of 9,500 lbs
  • Slotted mounting holes in a 10 x 4-1/2 inch pattern to accept most winches
  • Includes mounting hardware

Description

Overview

The Aries Offroad winch reinforcement bracket, part number ARS2072102, is the mounting bracket that lets you attach a winch to the ARIES TrailChaser aluminum front bumper on Jeep Wrangler JL vehicles. It fits the 2018-2026 Jeep Wrangler (JL) and the 2020-2026 Jeep Gladiator. Winch reinforcement brackets add the strength a winch mount needs, and this one is rated for a weight capacity of 9,500 lbs.

The bracket is constructed from high-strength carbon steel and has standard slotted mounting holes that accept most winches. It is not an OE bumper part and is designed to work with the aftermarket TrailChaser front bumper.

Key features

  • Required for mounting a winch on TrailChaser aluminum front bumpers
  • Rated for a weight capacity of 9,500 lbs
  • Slotted mounting holes in a 10 x 4-1/2 inch pattern to accept most winches
  • Heavy-duty carbon steel construction
  • Durable textured black powder coat finish
  • Includes mounting hardware for attaching to the bumper

Test fitting the bracket

Fitting a winch to a bracket starts with confirming the bolt spacing. Lay the winch against the slotted holes before final tightening, and check that the mounting bolts line up without forcing them. Slotted holes allow small adjustments, which helps when the winch base is not perfectly matched to the pattern. Use the correct hardware and torque each bolt once the winch is seated.

A reinforcement bracket adds strength to the mount, but the bumper and frame still carry the load. Inspect the bracket welds, mounting points and bumper bolts after the first off-road trips, and look for cracks or movement. Keep the winch cable and hook clear of the bumper edges, and use a fairlead or snatch block when a pull needs a different angle. Replace any part that shows fatigue or damage.

  • Test-fit the winch before final tightening
  • Check welds and bolts after rough trips
  • Use a snatch block for angled pulls

Specifications

Brand Aries Offroad
Part number ARS2072102
Material High-strength carbon steel
Finish Textured black powder coat
Weight capacity 9,500 lbs
Hole pattern 10 x 4-1/2 inch slotted
OE bumper No, not an OE bumper
Fitment type Direct fit
Warranty Limited lifetime; three years on finish, one year on parts

Vehicle fitment

It fits 2018-2026 Jeep Wrangler (JL) 2-door and Unlimited 4-door models, across trims including Willys, Sport, Sport S, Freedom, Islander, Rubicon, Moab, Sahara and 80th Anniversary. It also fits the 2020-2026 Jeep Gladiator in trims such as Sport, Overland, Mojave, Rubicon and Launch Edition.

Confirm fit for your vehicle’s year, model and trim before ordering, especially if you have a 2007-2018 Wrangler JK or an earlier Wrangler generation.

Installation notes

The bracket comes with its mounting hardware. Test-fit the winch against the slotted hole pattern before final tightening, and confirm the winch’s bolt spacing suits the slots.

What’s included

Winch reinforcement bracket with mounting hardware for the bumper.

Not included: the winch and the TrailChaser front bumper the bracket mounts to.

Fitment

VehicleYearsTrims
Jeep Gladiator2020–202680th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys, Willys Sport
Jeep Wrangler (JL)2018–202680th Anniversary (2-Door), Freedom (2-Door), Islander (2-Door), Rubicon (2-Door), Sport (2-Door), Sport S (2-Door), Unlimited 80th Anniversary (4-Door), Unlimited Freedom (4-Door), Unlimited High Altitude (4-Door), Unlimited Islander (4-Door), Unlimited Moab (4-Door), Unlimited Rubicon (4-Door), Unlimited Rubicon 392, Unlimited Sahara (4-Door), Unlimited Sahara Altitude (4-Door), Unlimited Sport (4-Door), Unlimited Sport Altitude (4-Door), Unlimited Sport S (4-Door), Unlimited Willys (4-Door), Unlimited Willys Sport (4-Door), Willys (2-Door), Willys Sport (2-Door)

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which vehicles does the Aries ARS2072102 bracket fit?

It fits the 2018-2026 Jeep Wrangler (JL) and the 2020-2026 Jeep Gladiator, and it is needed for mounting a winch on the TrailChaser aluminum front bumper. Confirm fit for your vehicle's year, model and trim before ordering, especially for the 2007-2018 Wrangler JK.

What is the weight rating of the Aries winch reinforcement bracket?

The bracket is rated for a weight capacity of 9,500 lbs. It is made from heavy-duty carbon steel with a textured black powder coat finish, and its slotted holes in a 10 x 4-1/2 inch pattern accept most winches.

Does the bracket come with mounting hardware, and is a winch included?

Yes, it includes mounting hardware for attaching the bracket to the bumper. The winch is not included. The slotted holes are meant to accept most winches, so check your winch's bolt spacing against the pattern before installing it.

What warranty does Aries give on this bracket?

It carries a limited lifetime warranty, with three years on the finish and one year on parts. Keep your proof of purchase with your paperwork in case you need to make a claim.

How can it be told if the bracket needs replacing?

Look for cracks around the bracket, bent mounting tabs, loose bolts or visible movement of the winch under load. Any of these signs means the bracket should be inspected closely or replaced before the next pull.

Should a winch on this bracket be used with a fairlead?

A fairlead guides the cable and reduces wear on the bumper edge. Choose a fairlead that matches the winch and mount, and make sure the cable runs straight through it. Check the fairlead for wear each time you spool the cable.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon