Overview
The ARIES Offroad Bar Grille/Brush Guard in black, part ARS9048, is a steel grille guard for the 2005–2015 Nissan Xterra. It gives the front of the vehicle an aftermarket look along with extra front-end protection, and its crossbar can take LED lights.
Each guard uses 1-1/2 inch heavy-wall tubing welded into a one-piece frame, with rubber-coated vertical risers and horizontal crossbars. The crossbar has two pre-drilled holes for LED work lights or an LED light bar. An LED light bar mounts with ARIES base mount brackets, part #1110312. Installation is no-drill.
The guard is a direct fit for the Nissan Xterra.
The brackets bolt onto the vehicle’s frame at existing mounting points. The risers, brush guards and crossbars are shaped to follow the body lines of the vehicle.
Key features
- Wraparound brush guard configuration
- Customizable center crossbar for LED lights
- Two pre-drilled holes in the crossbar for LED work lights or an LED light bar
- 1-1/2 inch heavy-wall tubing in a welded one-piece frame
- Rubber-coated vertical risers and horizontal crossbars
- No-drill installation
Adding LED lights to a guard
A center crossbar with pre-drilled holes gives a place to mount LED work lights or a light bar. Before mounting, decide where the light should point and confirm the bar clears the hood and bumper when the hood opens. Aim the lights with the truck parked on level ground so the beam sits where you intend.
Wiring is the part that often gets overlooked. Route the harness away from moving parts, use a switch with a fuse, and secure the wire with ties so it does not rub against the steel. If the light bar will be used at low speed on trails, plan for a clear view of the ground and check the light’s mounting after rough terrain.
Plan the light bar and brackets together with the guard so the parts suit each other. After the first few drives, re-check the fasteners and the bar’s angle, since vibration can shift the aim over time.
- Plan wire routing before mounting
- Use a fused switch for the light circuit
- Re-aim lights after rough driving
Specifications
| Brand | Aries Offroad |
|---|---|
| Part number | ARS9048 |
| Application | Nissan Xterra, 2005–2015 |
| Material | Steel |
| Finish | Black powder coat |
| Tubing | 1-1/2 inch heavy-wall |
| Light mount | Two pre-drilled holes in the crossbar; ARIES base mount brackets, part #1110312 |
| Installation | No drill |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2005–2015 Nissan Xterra in Off-Road, PRO-4X, S, SE and X configurations.
Other Nissan models are not covered. Verify year, model and trim before buying.
Installation notes
The mounting brackets attach to existing points on the frame, and the guard mounts without drilling. An LED light bar needs the ARIES base mount brackets, part #1110312.
What’s included
Check the package contents against your installation before starting, including whether an LED light bar and base mount brackets are needed.
















