Overview
The ARB Zero Fridge Freezer Tie-Down Kit, part number ARB10900046, is a black tie-down kit made for ARB Zero Fridge Freezers. Tie-down kits hold a fridge freezer in place so it does not shift while the vehicle is moving, and this kit is intended for the Zero model.
Confirm the kit’s contents, strap or anchor types and the vehicle setup against your installation before setting it up.
Key features
- Tie-down kit designed for ARB Zero Fridge Freezers
- Black finish
- Part number ARB10900046
- Accessory in the cooler and fridge category
Mounting a fridge freezer safely
Securing a fridge freezer starts with the mounting surface. The floor or rail should be solid and clean, with no loose panels or corrosion that could let the fridge shift. Mark the fridge position before fitting anything so the tie-down sits where it can hold the case firmly rather than resting on a soft edge. A level, stable base also keeps the fridge’s compressor and vents working as intended.
Ventilation matters once the fridge is secured. Keep space around the vents clear of straps and cargo, since blocked airflow makes the unit work harder. Route any power cable so it cannot be pinched or rubbed by the tie-down, and check it after each set-up because movement can wear insulation over time.
When in doubt, test the setup by pressing firmly on the fridge from several sides. It should not rock or lift in its position. Repeat the check after rough driving.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARB10900046 |
| Type | Tie-down kit |
| Compatible fridge | ARB Zero Fridge Freezer |
| Color | Black |
Vehicle fitment
It is a fridge accessory designed for the Zero fridge freezer, so it is matched to the fridge rather than a vehicle.
Confirm your ARB Zero fridge model before setting up the kit, since the kit is named for the fridge rather than a vehicle.
What’s included
Confirm the straps, hardware and anchors included before setting up the kit.











