Overview
The ARB BASE Rack jerry can double horizontal mount, part number 1780350, is a fixture for carrying two jerry cans on an ARB BASE roof rack. The horizontal orientation is the difference from the vertical version, which stands the cans up.
The mount is an accessory for the BASE Rack, so the rack must be installed first. The BASE Rack offers flexibility and personalisation, and a jerry can mount is one of the fixtures it supports.
Key features
- Double mount for two jerry cans
- Horizontal orientation on the BASE Rack
- Clamp mount to the dovetail extrusion
- Part of ARB’s BASE Rack accessory range
BASE Rack system
ARB builds the BASE Rack around a dovetail extrusion that runs the full perimeter and along each edge of the internal beams. Fixtures slide onto that dovetail, so a jerry can mount can be placed anywhere along the rack and moved later.
The dovetail channels resist dust and debris, which traditional roof rack channels can collect. Accessories can be added or removed without disturbing the other loads on the rack.
Loading and jerry can use
Jerry cans are heavy when full, so placement on a roof rack matters. Horizontal mounting lays the cans flat, which can lower the center of gravity compared with cans stood upright, but the load still sits above the roof. Keep the heavier can closer to the centerline and secure the cap area so fuel and water do not leak onto the rack or roof.
Fuel cans should be stored in a vented, upright position when possible, so check the cap seals before every trip. Inspect the mount’s clamps for wear after rough roads, and check that the cans cannot rub against the rack. Empty cans reduce the load but still need secure mounting, so keep the mount clear of mud and grit that can build up in the channel.
- Check cap seals before each trip
- Keep cans clear of the rack edges
- Tighten clamps after rough sections
- Store spare fuel in approved containers only
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARB1780350 |
| Product type | Jerry can mount, double horizontal |
| Capacity | Two jerry cans |
| Orientation | Horizontal |
| Attachment | Clamp mount to the BASE Rack dovetail |
Vehicle fitment
Fit depends on the BASE Rack it clamps to. Check your rack size and roof mounting against the rack before ordering, and confirm fit for your vehicle’s year, model and trim.
What’s included
The kit is the double horizontal jerry can mount for the BASE Rack.
Not included: the BASE Rack itself and the two jerry cans.









