Overview
The ARB Awning Quick Release Bracket Kit 2, part number ARB813407, is a set of removable brackets that mounts ARB awnings to ARB roof racks. The brackets need no drilling or modifications in most cases, and each uses a simple one-bolt configuration so the bracket can be removed when the awning is not needed on the vehicle.
A 2000 or 2500 awning cannot travel on the back of an SUV, but two sets of brackets let a wide awning move from the side to the rear in minutes. Because the brackets come off easily, the awning can also move from one side of the vehicle to another, or between vehicles.
ARB offers quick release brackets for several roof rack types. Kit 1 suits side mounting on ARB Touring and Flat Racks. Kit 3 covers side and rear mounting on cage style ARB racks. Kit 4 is for rear mounting on ARB Touring and Flat Racks. Kit 5 suits ARB Cage Racks already drilled for an awning, or competitors’ racks. Confirm the rack match for Kit 2 against your roof rack before ordering.
The brackets are Australian-made from 3mm powder-coated steel and zinc-plated to resist corrosion and rubbing, which suits a bracket that is moved between mounting points.
Key features
- No drilling or modifications required in most cases
- Simple one-bolt configuration for easy removal
- Made in Australia from 3mm powder-coated steel
- Zinc-plated to resist corrosion and rubbing
- Lets the awning move between sides of the vehicle or between vehicles
- Two sets allow a wide awning to move from the side to the rear
Moving an awning between mounts
A quick release bracket kit is useful when the awning is needed only on some trips, since the bracket can come off between uses. Removing and refitting the brackets is simple, but each move is a chance for the bolt to loosen, so check it is snug every time the bracket goes back on the roof rack.
Before moving an awning between sides or vehicles, check that the rack is in good condition and that the awning sits level. Wind and rough roads load the mounting points, so corrosion or worn rack fittings are worth looking at during regular inspection. Keep the bracket surfaces clean so the zinc plating and powder coat hold up.
If the awning is moved to the rear of an SUV, plan the cleaning and drying steps as well, since moisture trapped between the bracket and rack can speed up corrosion.
- Tighten the bolt after each move
- Check the roof rack for corrosion
- Keep the bracket free of grit and road salt
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARB813407 |
| Product type | Awning quick release bracket kit |
| Kit | Kit 2 |
| Material | 3mm powder-coated steel |
| Finish | Zinc-plated |
| Mounting | One-bolt configuration |
| Compatible awnings | ARB awnings |
| Fitment | Universal Fit |
Vehicle fitment
It is universal fit, so the roof rack and awning decide suitability rather than a vehicle year or model. The brackets are designed for ARB roof racks, including Touring, Flat and Cage style racks.
Confirm the rack match for Kit 2 and your roof rack before ordering.
What’s included
The kit is a set of removable brackets for mounting ARB awnings to roof racks.
Not included: The ARB awning and the roof rack, which are needed to use the brackets.










