Overview
The AMP-Research PowerStep LED Light Kit, part number 75131-01A, is an LED light kit made for the PowerStep running board. It carries a Universal Fit designation.
Key features
- LED lighting kit
- Named for the PowerStep running board
- Listed with Universal Fit
- Part number 75131-01A
Wiring and mounting basics
LED step lights draw power from the vehicle, so the wiring plan matters as much as the lights themselves. A fused connection protects the circuit if a wire chafes or shorts. Run the harness away from the exhaust, moving suspension parts and sharp body edges, and secure it with clips rather than tape alone.
Lights that stay on with the engine off can drain a battery. A switch or relay that powers the lights only with the ignition on reduces that risk. Lights mounted low on a running board also take spray and grit, so check the lenses and seals periodically and clean them with mild soap and water.
- Use a fused connection
- Route wiring away from heat and moving parts
- Check lens seals after wet or muddy trips
Specifications
| Brand | AMP-Research |
|---|---|
| Part number | 75131-01A |
| UPC | 815410010323 |
| Product type | LED light kit |
| Fitment listed | Universal Fit |
Vehicle fitment
Universal Fit is listed, but the kit is named for the PowerStep running board, so vehicle compatibility is not confirmed here. No years, makes or models are named.
Compare the kit with your running board model and vehicle before choosing it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
LED kits need a connection to the vehicle’s electrical system. Use a fused connection and check local road-use rules for auxiliary lights before installing.
What’s included
LED light kit for the PowerStep running board.
Not included: Check the package contents against your running board and wiring needs before starting.














