Overview
The AIRAID 720-472 is an oil-type air cleaner assembly built around oiled cotton gauze and a SynthaFlow dry synthetic layer. It is a washable, reusable aftermarket replacement. It cross-references Airaid part numbers it replaces rather than naming vehicles.
The filter has multiple layers of oiled cotton and gauze with 304 stainless steel mesh. The SynthaFlow layer is standard on all Airaid filters, the filter is made in the U.S.A., and it carries a Lifetime No-Hassle warranty.
Key features
- Multiple layers of oiled cotton and gauze media
- SynthaFlow dry synthetic layer, which Airaid says is standard on all its filters
- 304 stainless steel mesh
- Washable and reusable
- Made in the U.S.A.
- Lifetime No-Hassle warranty.
Cleaning and re-oiling
Reusable oiled cotton filters trap dirt in the media, so they need periodic cleaning and re-oiling to keep flowing well. Cleaning removes built-up dust, and re-oiling restores the surface that catches fine particles. Skipping these steps can let dirt pass through or restrict airflow, depending on how dusty the environment is.
When cleaning, use a cleaner and oil suited to the filter type rather than household solvents. Let the element dry fully before re-oiling, and avoid soaking the gauze so the oil layer stays even. Inspect the seal and frame each time, since a damaged edge lets unfiltered air bypass the media.
- Clean the element when dust builds up on the pleats
- Let it dry fully before re-oiling
- Check the edge seal for tears or softening
- Compare the old element’s size with the new one before fitting
Specifications
| Brand | AIRAID |
|---|---|
| Part number | 720-472 |
| UPC | 642046724726 |
| Filter type | Oil |
| Washable | Yes |
| Filter material | Cotton gauze with SynthaFlow layer |
| Replacement type | Aftermarket replacement |
| Filter dimensions | B-11 in. x 8 in.; T-7 1/8 in. x 4 1/8 in. x L-10 in. |
| Filter inlet size | 6 in. |
| Mesh | 304 stainless steel |
Vehicle fitment
Cross-referenced Airaid filter part numbers are 200-219, 200-287, 200-289, 200-233, 200-235, 400-222, 510-213 and 510-223. Use these numbers to check the element you are replacing.
Because only filter part numbers are given, confirm the part number printed on your current element before installing. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the B-11 in. x 8 in. and T-7 1/8 in. x 4 1/8 in. x L-10 in. dimensions with the element you remove, and check that the 6 in. inlet matches your intake opening.
What’s included
One AIRAID 720-472 air cleaner assembly.
Not included: Check the package contents against your installation before starting, including any housing, clamps or hardware.









