Overview
The Vision X Lighting 1.5-inch Tube Mount Clamp, part number 9897264, is a black tube mount clamp that holds a light or accessory to a round tube. Its updated design offers a flat mounting surface, so it suits any light or accessory. It is Universal Fit and is not tied to a specific vehicle.
Clamps come as a pair (2) and are available in nine sizes: 0.75 inch, 1.00 inch, 1.25 inch, 1.50 inch, 1.75 inch, 2.00 inch, 2.25 inch, 2.50 inch and 3.00 inch. The 1.50 inch size matches a 1.5-inch tube. A rubber insert gives extra adjustability in mounting diameter and protects the finish of the tube.
Key features
- Flat mounting surface for lights and accessories
- Rubber insert adds adjustability in mounting diameter and protects tube finish
- Pair of clamps (2)
- Nine sizes from 0.75 inch to 3.00 inch
- Larger size clamps feature a set screw to prevent rotation around the tube
- Sizes 0.75 inch through 1.75 inch have an M8 through hole; sizes 2.00 inch through 3.00 inch have an M10 through hole
- Through holes can be drilled out or used with spacers to adjust size
Choosing the right size
Clamp size is the first decision, and it comes down to the tube you are mounting to. Measure the outside diameter at the exact spot where the clamp will sit, not on a different section of the bar. A clamp that is slightly too large can be shimmed with a spacer, while one that is too small will not close around the tube.
The rubber insert helps grip without marking the tube, which matters on painted or chrome bars. On larger sizes, tighten the set screw after the clamp is in position so it cannot spin around the tube under load. Check the mounting hardware for tightness after the first few trips.
- Measure the tube at the exact mounting spot
- Use spacers only with the holes designed for them
- Tighten evenly to keep the clamp square
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 9897264 |
| UPC | 887009897264 |
| Mounting type | Tube mount |
| Color | Black |
| Quantity | Pair (2) |
| Clamp sizes | 0.75 inch, 1.00 inch, 1.25 inch, 1.50 inch, 1.75 inch, 2.00 inch, 2.25 inch, 2.50 inch, 3.00 inch |
| Through hole | M8 for 0.75 to 1.75 inch sizes; M10 for 2.00 to 3.00 inch sizes |
Vehicle fitment
The clamp is Universal Fit and is not vehicle-specific. It mounts to a round tube, so choose the size that matches the tube diameter you are mounting to. Fit depends on the tube diameter rather than year, model or trim.
Confirm your vehicle’s year, model and trim before ordering. Check the tube diameter and mounting hardware before selecting a size.
Installation notes
Mounting holes can be drilled out or used with spacers to change the fit, so measure the tube first. Clamp sizes 2.00 inch through 3.00 inch use M10 hardware, while the smaller sizes use M8 hardware. Larger size clamps include a set screw that stops the clamp from rotating around the tube.
What’s included
A pair of tube mount clamps (2) with rubber inserts and a flat mounting surface. The set screw is on the larger sizes.
Not included: the light or accessory you attach to the clamp.









