Overview
The ARB Winch Install Kit, part number 3500860, is a winch installation kit for the 2016 Toyota Tacoma and is a direct fit for that truck. Check the package contents against your installation before starting.
The kit belongs to the winch mounts group in ARB’s winch accessories range and is intended for fitting a winch to a Tacoma. Confirm the winch and bumper it works with before purchase.
Key features
- Winch install kit from ARB 4×4 Accessories
- Made for the 2016 Toyota Tacoma.
- Direct fit for the 2016 Toyota Tacoma.
- Category: winch mounts and accessories
Preparing a Tacoma for a winch
A winch on a Tacoma puts a steady pulling load into the front frame and bumper, so the mounting points need to be sound before use. Look over the frame rails, bolt holes and any surface rust. Clean the contact areas so the mount sits flat and the fasteners can hold their torque under load.
Electrical planning matters as much as the mechanics. A winch draws heavy current, so it should have its own properly sized feed, fuse or breaker, and a solenoid placed where it stays dry. Route the cable away from hot exhaust parts and moving suspension components, and keep a recovery strap and shackles handy for jobs that are not straight pulls.
- Inspect frame rails and bolt holes before mounting
- Route the winch cable away from heat and moving parts
- Keep recovery rigging matched to the winch load
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 3500860 (also written ARB3500860) |
| UPC | 9332018043467 |
| Product type | Winch install kit |
| Category | Winch mounts |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2016 Toyota Tacoma in the Limited, SR, SR5, TRD Off-Road and TRD Sport trims. Confirm your trim before ordering.
Confirm fit for your vehicle’s year, model and trim before ordering. This kit is for the 2016 model year Tacoma.
Installation notes
The installation needs care because the kit carries pulling loads. Follow the winch and bumper fitting steps exactly, use the supplied hardware, and tighten every fastener to the required torque. Wire the winch with correctly sized cable and a fuse or breaker rated for it. Re-check all fasteners after the first few miles and after the first use. A professional installer is advisable if the structural or electrical work is unfamiliar.
What’s included
Confirm the kit contents match your winch and bumper before starting the fit.
Not included: a winch, a bumper or a winch cable.









