Overview
The Warn Winch Mounting System, part number 60272, is an ATV mount made to carry a Warn ATV winch. Warn engineers its winches and mounting kits as one matched system, so this kit is intended for use with a Warn winch. It bolts directly to the ATV structure and needs no cutting or fabrication.
The load from a pull moves through the mount and into the ATV frame instead of concentrating at one spot. That spread adds stability and helps protect the ATV’s ride and handling. The winch and mount were field tested to full winch capacity together.
Key features
- Bolts directly to the ATV structure with no cutting or fabrication
- Designed to pair with a Warn ATV winch as one system
- Spreads pulling load through the ATV frame during winching
- Warn reports field testing to full winch capacity with the matched winch
Before you winch
A winch mount is only as sound as the frame it bolts to. Before fitting one, look over the mounting area for cracks, rust, or bent brackets, and make sure the frame members under the mount are solid. Loads from a pull are heavy and sudden, so any weakness will show up first at the bolt holes.
Winch mounts are often replaced along with the rest of the winch system, since the cable, hook, and control wiring wear as a set. A frayed cable or damaged wiring should be addressed at the same time the mount is installed. Keep spare fasteners on hand so a loose bolt can be replaced quickly on the trail.
Winching also puts strain on the ATV’s suspension and tires under load. Use a snatch block when the pull angle is awkward, and avoid winching at sharp angles. Recheck the mount after every heavy recovery and before each trail ride.
Specifications
| Brand | Warn |
|---|---|
| Part number | 60272 |
| UPC | 1274860272 |
| Style | ATV |
Vehicle fitment
Winch mounts are shaped for particular ATV frames, and this one carries a Universal Fit label, so the model must be confirmed before buying. No year, make or model is tied to part 60272. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bolt-on installation needs no cutting or fabrication. Winching loads the joints repeatedly, so tighten the mounting fasteners fully and recheck them after the first few pulls.
What’s included
Check the package contents against your installation before starting. Not included: the Warn winch, which the mount is designed to carry.








