Overview
The Warrior 1575 is a windshield washer nozzle relocation kit for the 2007–2016 Jeep Wrangler (JK). It moves the washer nozzle from the factory position on the hood to a location within the cowling vent at the base of the windshield. The kit is intended for vehicles where hood hinge accessory mounts have blocked the factory hood-mounted spray nozzle.
Key features
- Relocates the washer nozzle from the hood to the cowling vent at the base of the windshield
- Suits 2- or 4-door models
- Hardware included
- Cover plate for the exposed hole in the hood included
Washer spray after relocation
Moving the washer nozzle changes where the spray lands, so check the aim once the kit is installed. Run the washers with the engine on and watch the stream, adjusting the nozzle angle so it hits the glass in the wiping area rather than the wiper arm or the cowl. Keep fluid lines free of kinks, and make sure the reservoir has enough fluid for a test run.
Cowl vent areas collect leaves and debris, so a relocated nozzle benefits from periodic cleaning of the vent screen and the nozzle tip. If spray weakens over time, look for a clogged filter in the line or a pump that is slowing down before replacing the nozzle. Keep the hood cover plate sealed so water does not enter the engine bay through the open hole.
Specifications
| Brand | Warrior |
|---|---|
| Part number | 1575 |
| UPC | 634146015750 |
| Type | Snap in |
| Door configuration | 2- or 4-door models |
| Hardware | Included |
Vehicle fitment
It fits the 2007–2016 Jeep Wrangler (JK), including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions and their Unlimited counterparts.
Other Wrangler generations and other Jeep models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit bolts on and includes hardware and a cover plate for the hole left in the hood. Check that hood hinge accessory mounts are the reason for the relocation before you start.
What’s included
Relocation kit hardware and a cover plate for the hood hole.












