Overview
The Warrior 90314A is a greasable leaf spring shackle bolt measuring 9/16 in x 4 in, supplied with no sleeves. It comes from the Warrior brand and carries a universal fit marking. Fit depends on your own shackle hardware, so measure the existing bolt’s diameter and length before fitting.
Key features
- Greaseable bolt design
- Size 9/16 in x 4 in
- No sleeves included
- Universal fit marking
Measuring before you fit
A shackle bolt holds the shackle to the spring eye and lets the spring change length as the axle moves. Because it pivots under load, the bolt surface and the bushing bore wear over time, which can make the rear feel loose or noisy. Greasing the joint helps limit that wear, provided the fitting is clean and the grease reaches the bearing surface.
Before installing, measure the old bolt’s diameter, length and thread, and check whether a sleeve sits in the bore. The 9/16 in diameter and 4 in length must match the bore and spring eye you have, so compare them rather than assume. Tighten the nut to the value in your service information, and recheck it after the first short drives. Clean the grease fitting and channel first so fresh lubricant reaches the bearing.
- Clean the grease fitting before greasing
- Check the bushing bore for wear
- Confirm whether a sleeve is needed before assembly
Specifications
| Brand | Warrior |
|---|---|
| Part number | 90314A |
| UPC | 634146903200 |
| Size | 9/16 in x 4 in |
| Lubrication | Greaseable |
| Sleeves | None |
Vehicle fitment
No vehicle is named for this bolt. Treat it as a general replacement and measure the diameter and length of your existing bolt against it before fitting, since shackle bolt sizes vary between applications.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One greasable bolt, 9/16 in x 4 in.
Not included: Sleeves are not supplied with this bolt.









