Overview
The Warn 88070 is a Gen II Trans4mer bracket kit made to mount the Gen II Trans4mer mid frame kit. It is for the 2011-2013 F-150 4WD with EcoBoost, and it works with #WAR88240 and #WAR88245.
Key features
- Bracket for the Gen II Trans4mer mid frame kit
- Application named as 2011-2013 F-150 4WD with EcoBoost
- Includes nuts and bolts
- For use with #WAR88240 and #WAR88245
Before you install
A mid frame kit ties drivetrain components to the frame, so the bracket has to line up with the frame rails and mounting points on your truck. Because the application is narrow, start by checking the drivetrain, engine and model year against the bracket before you open the box. Mismatched parts usually show up as holes that do not line up, so a loose test fit is the simplest check.
Use the included nuts and bolts at the points you are actually using, and avoid swapping in hardware of unknown grade. Tighten fasteners in stages so the bracket seats evenly, then recheck them after the first few drives. Look for cracking near bolt holes, rust starting at welds, and any movement at the frame contact. If the frame shows damage, have it inspected before adding load.
- Test-fit the bracket before final tightening
- Use only the hardware supplied for mounting points
- Recheck fasteners after the first drives
Specifications
| Brand | Warn |
|---|---|
| Part number | 88070 |
| UPC | 12748880707 |
| Type | Bracket kit |
| Application | 2011-2013 F-150 4WD with EcoBoost |
| Included | Nuts and bolts |
| Compatible with | #WAR88240 and #WAR88245 |
Vehicle fitment
It is for the 2011-2013 F-150 4WD with EcoBoost. Other F-150 years and 2WD trucks are outside this application, so check the drivetrain, engine and model year before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is for the Gen II Trans4mer mid frame kit, so confirm that kit matches before starting. Use the included nuts and bolts at the mounting points you are using.
What’s included
Nuts and bolts are included with the kit.
Not included: The Gen II Trans4mer mid frame kit, which this bracket is made to mount.









