Overview
The Warn JL Rubicon OE winch carrier, part 101255, is a winch mounting carrier for the 2018-2026 Jeep Wrangler JL, 2-door and 4-door models. Warn designed it for the winch-ready Rubicon bumper, an optional JL accessory identified by its removable center cover and outer wings.
The carrier positions the winch to improve airflow and has zero interference with the grille. It is made from 1/4 inch thick steel and includes a fairlead trim plate. It was designed, tested and manufactured in the USA.
It is certified to withstand 12,000 lb pulls. It fits Warn ZEON, Mopar Rubicon Winch, ZEON Platinum, VR, M8 and XD9 winches.
Key features
- Fits 2018-2026 Jeep Wrangler JL, 2-door and 4-door
- Designed for the winch-ready Rubicon bumper
- Certified to withstand 12,000 lb pulls
- Positions the winch to improve airflow, zero interference with the grille
- Constructed from 1/4 inch thick steel
- Includes fairlead trim plate
- Installs with no cutting, grinding or drilling
- Designed, tested and manufactured in the USA
Mounting checks
A winch carrier takes the full load of every pull, so the bolts and mounting points deserve a check before each trip. Look for loose fasteners, cracks near the mounting holes and any shifting of the winch on the carrier. A carrier that moves under load can put stress on the bumper and the winch body.
Because this carrier sits behind the grille area, it is worth checking clearance at the radiator and any front-mounted sensors after installation. Keep the fairlead trim plate clean and free of grit so the rope runs smoothly. When heavy pulls are common, inspect the steel frame for stress marks and recheck the hardware after the first few trail runs.
- Check bolts after the first trail runs
- Look for cracks near mounting points
- Confirm clearance at the grille and radiator
Specifications
| Brand | Warn |
|---|---|
| Part number | 101255 |
| UPC | 12748055945 |
| Material | Steel, 1/4 inch thick |
| Certified rating | 12,000 lb pulls |
| Winch fitment | Warn ZEON, Mopar Rubicon Winch, ZEON Platinum, VR, M8, XD9 |
| Vehicle | 2018-2026 Jeep Wrangler JL, 2-door and 4-door |
| Origin | Designed, tested and manufactured in the USA |
Vehicle fitment
It is for the 2018-2026 Jeep Wrangler JL, 2-door and 4-door, with the Rubicon winch-ready bumper.
It does not fit the earlier JK Wrangler (2007-2018) or the Jeep Gladiator (JT). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It installs with no cutting, grinding or drilling. Before fitting it, confirm your bumper has the removable center cover and outer wings of the winch-ready Rubicon bumper. Once mounted, secure the winch fully before pulling a load.
What’s included
The carrier includes a fairlead trim plate.
Not included: the winch, and the winch-ready Rubicon bumper the carrier is designed for.











