Overview
The Warn High Current Solenoid, part number 68379, is a replacement solenoid for Warn Truck and Jeep winches, built for high current circuits. Its job is to switch the heavy current that the winch motor draws.
It is a universal fit part, so the winch model decides whether it matches. Treat the winch model, battery voltage and serial number as the deciding details before you buy.
Key features
- High current solenoid design
- Warn part number 68379
- Replacement part for Warn Truck and Jeep winches
- Universal fit, matched by winch model
Heavy current and the winch circuit
A high current solenoid sits in the path between the battery and the winch motor, so it carries the largest load in the system. Its contacts open and close under that load, and any resistance in the cables or terminals adds heat. A solenoid that runs hot or chatters often has a connection problem as well as a switch problem, and both should be checked together.
Heavy current circuits depend on clean, tight connections and cables sized for the load. Before replacing a solenoid, inspect the battery terminals, cable ends and ground connection for corrosion. Keep the winch’s own fuse or breaker in mind as a protection point, and do not bypass it when testing.
- Check battery terminals for corrosion
- Inspect cable ends for heat damage
- Keep the winch’s fuse or breaker in place
Specifications
| Brand | Warn |
|---|---|
| Part number | 68379 |
| UPC | 1274868379 |
| Type | High current solenoid |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit part, so no vehicle model applies. Its compatibility is set by the winch it is installed on.
Confirm the winch model and battery voltage before ordering. Check your vehicle’s year, model and trim as well.
Installation notes
Work with the battery disconnected, since the terminals carry heavy current. Mark each cable before removing it.
What’s included
One solenoid is included.
Not included: the winch, cables and any bracket are separate items.









