Overview
The Vision X Lighting Universal Amber Billet LED Pod, part number 4004078, is a weather resistant pod with a billet mounting base and 15 high-output 5mm LEDs. It runs on a direct 12-volt hookup and is Universal Fit.
The pod is an accent or auxiliary light that puts out over 1 watt of LED light. Because it is not sized for one vehicle, the mounting position is up to the installer. Its amber color is part of the product title.
Key features
- Billet mounting base for a solid mount
- 15 high-output 5mm LEDs
- Over 1 watt of LED light output
- Weather resistant housing
- Direct 12-volt hookup
Mounting and wiring basics
A billet mount is solid, but the pod still needs to be bolted to a rigid surface that will not flex under vibration. Pick a spot with clear airflow around the housing and enough room for the wire run. Tighten the hardware evenly, then recheck it after the first few trail outings. A mount that twists under load will shake the light loose faster than most other issues.
Wiring matters as much as the mount. A direct 12-volt hookup should run through a fuse close to the power source, and the connections should be sealed against water. Route wires away from moving parts and sharp edges, and use a switch so the pod is not left running with the engine off.
- Use a fuse close to the battery
- Seal exposed connections
- Avoid sharp edges along the wire path
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 4004078 |
| UPC | 837544004078 |
| Color | Amber |
| Mounting base | Billet |
| LEDs | 15 high-output 5mm |
| Light output | Over 1 watt |
| Voltage | 12 volt direct hookup |
| Fitment | Universal Fit |
Vehicle fitment
The amber LED pod is universal and is not designed for a specific year, make or model. Choose a mounting spot that suits your setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the pod is a direct 12-volt hookup, wire it through a fused circuit and check local rules for auxiliary lights before use on the road.
What’s included
The package contains the pod only. Wiring, switches and mounting hardware are not included, so gather those parts before starting the install.









