Overview
The Recon single head L-bracket, part number 26422BRKT, is a mounting bracket for the 26422 LED strobe light. It is built to hold one strobe head, and it is grouped under auxiliary lighting.
The bracket is a mount rather than a light, so it works only with the strobe light it is designed for. Check the strobe and the surface you plan to bolt the bracket to before buying.
Mounting a strobe safely
A strobe head should sit on a rigid, flat surface where it cannot flex or vibrate loose. Bolt the L-bracket to a solid panel or frame point, and keep the mount clear of moving parts, suspension travel and the spare tire. Route the lead along existing wiring paths and secure it so it cannot rub or snag.
Power for a strobe should come through a fused relay so the switch carries only the control current. Aim the head with road use in mind, since a bright strobe can distract or dazzle other drivers, and check local rules before mounting it on a road vehicle. Recheck fasteners after the first few trips, because vibration works loose connections over time.
- Mount on a rigid, flat surface
- Keep the lead clear of moving parts
- Aim the head with road use in mind
Specifications
| Brand | Recon |
|---|---|
| Part number | 26422BRKT |
| Type | Single head L-bracket |
| Compatible light | 26422 LED strobe light |
| Category | Auxiliary lighting |
Vehicle fitment
No vehicle is named for this bracket. Its use depends on the strobe light and the mounting surface, so confirm both before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The strobe draws power from the vehicle, so wire it through a fused relay, and check local road-use rules for strobe lights before mounting it on a road vehicle.
What’s included
One single head L-bracket is described.
Not included: The 26422 LED strobe light is needed, and no mounting hardware is described, so plan to obtain both separately.









