Overview
The Tuffy 048-01 is a double compartment overhead console, a 16-gauge steel security enclosure with two separate lockable compartments for mounting a stereo, CB radio, speaker or other electronic device. It is designed for the overhead space between a Jeep’s sport bar and windshield.
Each compartment swings up flush with the enclosure when closed and is secured by a single lock. The console can also be mounted to a full roll cage using (3) 2-1/2 U-Bolts, which are not included, and it mounts to the factory holes without drilling. The finish is black powder coat.
Key features
- Two separate lockable compartments for a stereo, CB radio, speaker or other electronic device
- Compartments swing up flush with the enclosure when closed and are secured by one lock
- Uses the existing footman loop holes in the windshield and U-bolts to mount to the sport bar
- Mounts to factory holes, so no drilling is required
- Designed for a gap of 32-1/2 to 36-1/2 inches between the sport bar and windshield
- Expandable to fit between the roll bar and windshield
- Black powder coat finish on 16-gauge steel
Measuring for a sport bar mount
Overhead consoles hang from the top of the cab, so their fit is set by the space between the sport bar and windshield. Take the measurement at the mounting points on both sides and at the top and bottom, because a tapered gap can be narrower at one end. Write the numbers down before ordering and compare them against the design range of 32-1/2 to 36-1/2 inches.
Once mounted, the console adds weight high in the vehicle. Keep heavy electronics low in the bays, latch the doors before driving, and check the mounting hardware after rough trails. Sport bars and windshield frames can flex, so look for loosening over time, especially around the footman loop points.
- Measure the gap at both sides and the center
- Keep compartment doors latched while driving
- Recheck U-bolt nuts after first trail use
Specifications
| Brand | Tuffy |
|---|---|
| Part number | 048-01 |
| UPC | 4801000000 |
| Material | 16-gauge steel |
| Finish | Black powder coat |
| Compartments | 2 separate lockable compartments, secured by one lock |
| Mounting gap | 32-1/2 to 36-1/2 inches between sport bar and windshield |
| Roll cage mounting | (3) 2-1/2 U-Bolts, not included |
Vehicle fitment
Vehicle fit depends on the gap between the sport bar and windshield. Measure that gap first, since the console is designed for 32-1/2 to 36-1/2 inches. Confirm the year, model and trim of your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting uses the windshield footman loop holes and U-bolts at the sport bar, so the factory holes are used rather than new holes. Measure the gap before you start. For a full roll cage, plan on (3) 2-1/2 U-Bolts, which must be obtained separately. Keep the compartment doors securely closed whenever the vehicle is operated.
What’s included
The overhead console with its two lockable compartments and single lock.
Not included: (3) 2-1/2 U-Bolts for full roll cage mounting, and the stereo, CB radio, speaker or other electronics that mount inside the compartments.












