Overview
The Thule Traverse Short Roof Adapter 487 is a roof rack adapter for vehicles with a short or curved roof line. It works with the new Traverse feet and with both Thule Rapid Aero and square load bars, and it is used with part numbers 480R and 480.
Thule’s short roof adapter lets a Thule roof rack system attach to the vehicle roof. It fits the Kia Sportage, Range Rover Evoque and Toyota RAV4 models covered below.
Key features
- Short roof adapter for short or curved roof lines
- Works with the new Traverse feet
- Compatible with Thule Rapid Aero and square load bars
- For use with part numbers 480R and 480
- Direct fit
Roof rack loading basics
A roof rack adapter sits between the vehicle roof and the bars, so its job is to carry the load safely through the mounting points. Short and curved roof lines leave less room for clamping, which is why the adapter needs to match the roof shape closely. Before loading, look at the crossbars, feet and adapter contact points together, not one at a time.
Load limits on a roof rack depend on the vehicle, the rack and what is strapped to it, so keep gear weight within the limits for the whole system rather than the bars alone. Wind noise and fuel economy also change with a loaded rack, so plan trips with that in mind. Spread cargo evenly and strap it at several points.
- Inspect the adapter contact points for wear before each trip
- Check straps and bolts after the first stretch of highway driving
- Keep heavy items low and centered across the bars
Specifications
| Brand | Thule |
|---|---|
| Part number | 487 (THU487) |
| UPC | 91021986299 |
| Part type | Traverse Short Roof Adapter (SRA) |
| Compatible with | Traverse feet; Rapid Aero and square load bars |
| For use with | 480R and 480 |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1996 to 2002 Kia Sportage (Base, EX, Limited), the 2012 to 2018 Land Rover Range Rover Evoque (Autobiography, Dynamic, HSE, Landmark Edition, Prestige, Pure, SE and related trims) and the Toyota RAV4 (Base) for 1996 to 1998 and 2001 to 2002. Use part number 487 and the UPC to confirm you have the same item, because parts from the same maker can differ by vehicle, year or position.
For 1999 and 2000 RAV4 models, confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Torque all fasteners to the specified values. Check that the load bars and feet are tightened and that the rack is secure, and re-check it after the first miles of driving. Observe the load limits for your vehicle and rack. Test fit the part before final tightening, and check clearance with doors, the hood, the tailgate and moving parts. Protect paint and trim with masking tape or a soft cover during installation, and use only the hardware supplied for this adapter. Re-check the attachment periodically afterwards.












