Overview
The Thule Rapid Traverse Foot Pack, part number 480R, is a set of four roof rack feet for vehicles without a factory rack or rain gutters. Thule positions it as the replacement for the Thule 400XTR Aero foot, with simplified installation and a stronger fit. The foot pack is designed for use with Thule Rapid Aero bars instead of square load bars.
Confirm fit for your vehicle’s year, model and trim before ordering. To complete the rack, a Thule Traverse Fit Kit and Thule Rapid Aero load bars are needed, and both are sold separately.
Key features
- Patented MaxClamp Technology, which Thule says gives the most secure fit possible
- Integrated AcuTight Tensioning Tool that indicates when the rack is correctly installed
- 50% fewer parts and OneTouch Bar Lock for quicker installation
- Designed for Thule Rapid Aero bars
- Includes 4 Thule end caps
- Sold as a set of 4 feet
Before you install
A roof rack foot takes the load of the whole system, so the surface under it matters. Clean the roof contact points with a mild cleaner and let them dry before setting any foot. Dirt or wax trapped under a foot can shift during driving and cause rattling, so a quick check at the start of each install saves trouble later.
Feet are also what keeps the rack from marking the roof paint, so inspect the pads for flattening, cracking or grit after the rack comes off. Replacing worn pads is a simple way to protect the finish. Tighten clamps in the order the instructions show, then recheck them after the first drive, since new racks often settle slightly.
- Confirm the foot pad sits flat against the roof before clamping
- Recheck clamp tension after the first short drive
- Store the feet in a dry place when the rack is off the vehicle
Specifications
| Brand | Thule |
|---|---|
| Part number | 480R |
| UPC | 91021410770 |
| Quantity | Set of 4 feet |
| Bar compatibility | Thule Rapid Aero load bars |
| Included | 4 Thule end caps |
| Required, sold separately | Thule Traverse Fit Kit, Thule Rapid Aero load bars, 4 Thule lock cylinders |
Vehicle fitment
It is designed for vehicles without a factory rack or rain gutters.
Certain vehicles with shorter roof lines require the Thule Traverse 487 short roof adapter, sold separately. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The OneTouch Bar Lock and AcuTight tool are designed to simplify installation. Check roof line details before installing, and confirm the rack is fully seated before loading, since the tensioning tool shows when it is correctly installed.
What’s included
Set of 4 Thule Rapid Traverse feet and 4 Thule end caps.
Not included: Thule Traverse Fit Kit, Thule Rapid Aero load bars, Thule lock cylinders, and the Thule Traverse 487 short roof adapter where needed.












