Overview
The Anzo Third Brake Light Assembly, part number 531050, is an LED third brake light assembly with a smoke lens. It fits the 1999–2015 Ford F-250 Super Duty and F-350 Super Duty and the 1995–2011 Ford Ranger.
The assembly is D.O.T. compliant to S.A.E. standards and installs as a direct fit. Super Duty trims covered include Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL and XLT. Ranger trims covered include EV, Edge, FX4, STX, Splash, Sport, Tremor, XL, XL Sport and XLT.
Key features
- LED third brake light assembly
- Smoke lens
- D.O.T. compliant to S.A.E. standards
- Direct fit for the vehicles covered.
Wiring and road-use checks
A third brake light on a pickup sits high in the rear window or bed area, where it is easy to overlook until it stops working. Before fitting, look at the wire harness and connector for corrosion or pinched insulation, since a loose plug is a common reason a new assembly fails to light. Confirm the mounting points are clean and the gasket seats evenly so water does not reach the electronics.
LED assemblies draw less current than older bulbs, but a wired circuit still needs to be protected, so use a fused connection that matches the factory layout. Smoke lenses soften the look of the lamp when it is off, so test the brake function in daylight as well as at night. Local rules for third brake lights differ, so check them before any change to the rear lighting.
- Check the harness for corrosion or pinched insulation
- Seat the gasket evenly to keep water out
- Use a fused connection on wired circuits
Specifications
| Brand | Anzo |
|---|---|
| Part number | 531050 |
| UPC | 846959033351 |
| Type | Third brake light assembly |
| Light source | LED |
| Lens | Smoke |
| Compliance | D.O.T. compliant to S.A.E. standards |
Vehicle fitment
It fits the 1999–2015 Ford F-250 Super Duty and F-350 Super Duty and the 1995–2011 Ford Ranger. Other Ford models fall outside this fit.
Ford models other than these, and years outside the ranges above, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After connecting the assembly, confirm the brake and turn functions work. Lighting that is wired into the vehicle should use a fused circuit, and local road-use rules for third brake lights apply.
What’s included
The third brake light assembly, part number 531050, with LED lighting and a smoke lens.









