Overview
The Tekonsha P3 electronic brake control (part number 90195) is a proportional trailer brake controller for 1 to 4 axle trailers. It adds a Boost feature that applies more initial trailer braking when towing heavier trailers, and it is a universal fit product.
The P3 also works proportionally in reverse, which helps when backing into tough spots. A snap-in dash mounting clip and a removable electrical connector let you store the unit quickly when it is not in use.
Key features
- Proportional brake control for 1 to 4 axle trailers
- Boost feature for more initial trailer braking on heavier trailers
- Proportional operation in reverse for backing into tight spots
- Snap-in dash mounting clip
- Removable electrical connector for quick storage
- LED display with digital readout of connection, trailer brake voltage and diagnostics
Testing brake output
A proportional controller sends power to the trailer brakes in step with the tow vehicle’s deceleration, so the trailer brakes should feel like part of the tow vehicle’s braking. Setup matters: the output has to suit the trailer’s weight and brake size, and an output set too high can lock the trailer wheels on slick pavement.
Test the system in an empty parking area at low speed before the first real trip. Use the manual lever to confirm the trailer brakes engage, then adjust output while watching the LED readout. Recheck the setting after a few trips and whenever the load changes, since a heavier load usually needs a different setting.
- Test in an empty parking area first
- Use the manual lever to confirm trailer brakes engage
- Recheck output after the load changes
Specifications
| Brand | Tekonsha |
|---|---|
| Part number | 90195 |
| UPC | 783192015686 |
| Model | P3 |
| Trailer axles | 1 to 4 axle trailers |
| Control type | Proportional |
| Display | LED digital readout |
| Mounting | Snap-in dash clip |
| Fitment | Universal Fit |
Vehicle fitment
It is universal fit, so it is not tied to one tow vehicle. It is rated for 1 to 4 axle trailers, so count your trailer’s axles before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the unit using the snap-in dash clip, and disconnect the vehicle battery before any wiring work.
What’s included
The snap-in dash mounting clip and removable electrical connector are the parts covered here. Check the package contents against your installation before starting.




















