Overview
The SuperWinch Recovery Strap, part number 2518, is a 2 inch wide, 30 foot long recovery strap from Superwinch. Its overview gives a strength capacity of 15,600 lb.
The spec table gives a breaking strength of 20000 with no unit, which does not match the 15,600 lb figure. The gap is not explained, so confirm the rating with Superwinch before relying on either number.
Key features
- 2 inch width
- 30 foot length
- Strength capacity given as 15,600 lb
- Breaking strength is 20000, with the unit to confirm before heavy recovery.
- Universal fit
Strap care and inspection
Recovery straps are usually used under load for short, sudden pulls, so their condition matters more than their appearance. Look for cuts, deep scuffs, glazed areas and stitching that has started to lift. Any strap that has been overloaded or dropped on a hard surface should be retired rather than reused.
Store the strap dry and out of direct sunlight, since UV and moisture weaken synthetic fibers. Coil it loosely rather than knotting it, and keep it away from fuel, oil and chemicals. Use it with rated shackles and a recovery point that is strong enough for the pull, and avoid stepping on the strap or driving over it.
- Retire any strap that has been overloaded
- Use with rated shackles and recovery points
- Keep clear of the pull line during recovery
Specifications
| Brand | Superwinch |
|---|---|
| Part number | 2518 |
| UPC | 22705025188 |
| Width | 2 inches |
| Length | 30 feet |
| Strength capacity | 15,600 lb |
| Breaking strength | 20000 (no unit given) |
Vehicle fitment
Superwinch lists universal fit only, so vehicle match is not a factor for this strap.
Check the rating with the manufacturer before using the strap for heavy recovery.
What’s included
The recovery strap itself. No other items are named.








