Overview
The Smittybilt XRC winch replacement remote control, part number 97281-50, is a direct replacement unit for the remote that operates Smittybilt XRC winches. It works with all models of the XRC8, XRC10, XRC12 and XRC15 winches.
The unit is for owners whose winch remote has been damaged, such as one that has been run over. Replacing only the remote keeps the winch in service without replacing the winch itself.
Key features
- Direct replacement remote control
- Electric winch control
- Works with all XRC8, XRC10, XRC12 and XRC15 winch models
- Direct replacement unit, not a full winch
Winch remote care
A winch remote is a small electronic control that takes a lot of handling in mud and water. Store it clear of heat and rough contact, and keep the cord coiled loosely so it does not kink at the strain relief. Check the buttons and housing for cracks after trips, because a split case lets moisture reach the contacts and can cause intermittent operation.
Winch control problems often come from the connector or wiring rather than the remote itself. Before replacing a remote, clean the plug, check for corrosion on the pins and confirm the wiring is sound. If a remote keeps failing after a swap, the cause is usually in the winch wiring or the control circuit.
- Keep the connector covered when not in use
- Test controls before every recovery
- Replace cracked housings promptly
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 97281-50 |
| UPC | 631410088526 |
| Product | XRC winch replacement remote control |
| Compatible winches | XRC8, XRC10, XRC12, XRC15 |
| Winch type | Electric |
Vehicle fitment
This remote is not vehicle specific. It matches the Smittybilt XRC8, XRC10, XRC12 and XRC15 winches, so the winch model matters more than the vehicle it is mounted on.
Check the winch model before ordering. Confirm the connector matches your winch wiring before installation.
What’s included
The unit is the remote control only, not a winch.












