Overview
The Smittybilt M1 Grille Insert, part number S/B615842, is a three-piece wire mesh grille insert for the 2013-2015 Toyota Tacoma pickup, in the Base, Pre Runner and X-Runner versions. The grille is made from 304 marine grade stainless steel with stainless steel plated lugs around the outer ring.
The finish is a black powder coat, and whether it is textured or satin should be confirmed before ordering. The finish carries a five year warranty. The grille is robotically welded with no exposed welds.
Key features
- Three-piece set
- 304 marine grade stainless steel
- Stainless steel plated lugs
- Black powder coat
- Robotically welded with no exposed welds
- Five year finish warranty
Finish and fit checks
An insert changes the look of the grille opening more than the function, so a careful check of the finish is worth the time. Powder coat on a three-piece set can vary in sheen between pieces, especially where the edges were cut or welded. Look at all pieces under daylight before fitting, and compare them with the surrounding trim.
Fit is the bigger concern for a set like this. Each piece must sit square against the shell, with the mounting tabs aligned to the truck’s own clips. Loose or misaligned pieces can vibrate on rough roads, so tighten fasteners in stages and recheck them after the first few drives.
- Compare finish sheen across all three pieces in daylight
- Check that each piece sits square before final tightening
- Recheck fasteners after the first few drives
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | S/B615842 |
| UPC | 631410115581 |
| Pieces | 3 |
| Material | 304 marine grade stainless steel |
| Finish | Black powder coat, textured or satin |
| Lugs | Stainless steel plated |
| Finish warranty | 5 year |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2013-2015 Toyota Tacoma, across the Base, Pre Runner and X-Runner versions.
It does not fit the 2005-2011 Tacoma, which uses the S/B615841 grille, or the Tundra. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Modifications to the OE grille shell are required, so this insert is not a simple bolt-in part. The three pieces should be checked against the grille shell before the finish is final.






















