Overview
The Smittybilt Fold and Tumble Rear Seat in Charcoal (part number 41311) is a rear seat that folds and tumbles forward to create cargo space behind the front seats. It fits 1987 to 1995 Jeep Wrangler (YJ) models and matches the factory replacement seat pattern.
The seat is finished in light gray denim vinyl, with a choice of plush vinyl or full fabric covering. Installation requires minimal drilling, and mounting hardware is included with the seat.
Key features
- Fold and tumble design that clears cargo space
- Matches the factory replacement seat pattern
- Charcoal light gray denim vinyl
- Minimal drilling for installation
- Mounting hardware included
- Rear seat position
Preparing the cabin for installation
A replacement rear seat is easier to fit when the area is cleared first. Remove loose gear, floor mats and anything stored under the old seat before starting. Look at the floor and mounting points while the seat is out, since surface rust or loose floor panels are easier to address before a new seat goes in.
Because this seat is designed to fold and tumble, the hinge area needs room to move freely. Keep cables, carpet edges and cargo straps out of the path of the mechanism. Test the fold motion several times after installation and make sure the seat locks upright. Wiring for lights or sensors near the rear should be routed away from the hinge so it does not pinch when the seat folds.
- Wear eye protection when drilling
- Deburr any drilled holes before fitting hardware
- Test the latch and fold motion before using the cargo space
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 41311 |
| UPC | 631410066906 |
| Seat location | Rear |
| Seat type | Fold and tumble |
| Color | Charcoal |
| Covering | Plush vinyl or full fabric front covering |
| Installation | Minimal drilling; mounting hardware included |
Vehicle fitment
It fits the 1987 to 1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport versions.
Later Wrangler generations from the TJ, LJ and JK years, and the CJ models, are outside this seat’s fit. Verify your year, model and trim before buying.
Installation notes
Installation involves minimal drilling. The seat is meant to replace the factory rear seat, so keep the fold and tumble mechanism clear of the cargo area during installation.
What’s included
One rear fold and tumble seat in Charcoal with mounting hardware.


















