Overview
The Smittybilt Exoskeleton, part 76840, is a tubular body protection frame for the 2007 to 2016 Jeep Wrangler JK Unlimited and Rubicon Unlimited, in 4-door models. It guards against rocks and obstacles to help keep the sheet metal straight. The frame mounts directly to the vehicle body and provides full body protection.
The frame is built from 1.75 inch diameter, 0.120 wall tubing, which the company says is thick enough to prevent damage while keeping the whole exoskeleton at 70 pounds. Four crossbars provide rack and tent mounting points and can be removed to take the soft top or hardtop off.
Integrated light mounting tabs sit at the front and rear, and the front brackets accommodate two 50 inch LED light bars. The finish is a black powder coat with a 5 year limited warranty, plus a limited lifetime warranty. Installation uses the Smittybilt Nutsert tool, part S/B2834.
Key features
- Full body protection for the sheet metal
- 1.75 inch diameter, 0.120 wall tubing
- Four removable crossbars for rack and tent mounting
- Crossbars come off to remove a soft top or hardtop
- Front and rear integrated light mounting tabs
- Front brackets fit two 50 inch LED light bars
- Black powder coat finish
Before you buy
Body protection frames add weight and change how a Jeep sits on its approach and departure angles, so think about how the vehicle is used. A frame that wraps the body can catch on brush and tree limbs, and the mounting points take repeated stress on rough terrain. Look at the mount areas after the first few trail runs and check that fasteners remain snug.
Tubular frames work best alongside other body and drivetrain parts that are often replaced together, such as bumpers, tire carriers and the light setup that the frame is designed to carry. Plan the wiring for any lights before drilling, and route it so it cannot rub on the tubing.
- Recheck fasteners after early trail use
- Plan light wiring before installation
- Inspect the powder coat for chips and touch them up to limit corrosion
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 76840 |
| UPC | 631410132168 |
| Tubing | 1.75 inch diameter, 0.120 wall |
| Weight | 70 pounds |
| Finish | Black powder coat |
| Light bar capacity | Two 50 inch LED light bars |
| Warranty | 5 year limited, plus Smittybilt limited lifetime warranty |
Vehicle fitment
It fits the 2007 to 2016 Jeep Wrangler JK Unlimited and Rubicon Unlimited, in 4-door form.
The frame does not cover the 2-door JK, the 2017 to 2018 Wrangler JK or the Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting or drilling is required for installation. The Smittybilt Nutsert tool, part S/B2834, is used for the fasteners.
What’s included
The exoskeleton frame with its crossbars and light mounting tabs.
Not included: The Nutsert tool, part S/B2834, and any light bars.






































