Overview
The Smittybilt 7505 is a chrome custom tow hook rated for 10,000 lb of tow capacity. Smittybilt says tow hooks like this are useful for pulling a Jeep out of tight spots.
The hook mounts through two bolt holes and comes with a hardware kit. It cannot be used with the Olympic basher bumper or the tube bumper with the riser, so check your bumper before fitting it.
Key features
- 10,000 lb rated tow capacity
- Chrome finish
- Two mounting holes
- Hardware kit included
Using a tow hook safely
A tow hook is a rated point for recovery, but the bumper and frame behind it carry the load. Use a shackle or strap rated for the recovery, keep the pull in line with the hook, and avoid sharp angles that put side load on the bolts. Make sure the vehicle is in a safe position and that nobody stands in the line of the strap when pulling.
Steel bumpers and mounting points can loosen after rough use, so re-check the bolts after recovery work and before the next trail trip. Store the hardware kit where it will stay dry, and keep the chrome clean with mild soap so the surface does not pit. Replace any hook that shows cracks, bends or heavy rust.
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 7505 |
| UPC | 631410065848 |
| Tow capacity | 10,000 lb rated |
| Finish | Chrome |
| Mounting holes | 2 |
| Hardware | Hardware kit included |
Vehicle fitment
No vehicle years or models are attached to the 7505. Check the mounting holes against your bumper before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the included hardware kit for the two mounting holes. Confirm your bumper is not one of the two types the hook cannot be used with.
What’s included
One chrome tow hook with a hardware kit for its two mounting holes.




















