Overview
The Kentrol Stainless Steel Tow Hook, part number 30538, is a 304 stainless steel tow hook with a 5,000 lb maximum load capacity. Stainless steel bolts are included with it.
The hook mounts to a front bumper. A tube front bumper needs a spacer for the hook to install properly, and tow hooks cannot be installed as intended with tube bumpers that have a risor.
Key features
- 304 stainless steel construction, described by Kentrol as virgin metal
- 5,000 lb maximum load capacity
- Stainless steel hardware included
- Mirror-like finish that Kentrol says keeps its shine with occasional waxing
- Spacer needed with a tube front bumper
Bumper and recovery loads
A tow hook is only as useful as the bumper behind it. Front bumpers are built for impact, not pulling, and many have a hollow tube or box section that spreads a pull across thin walls. Look at the bumper mounting points, brackets and the frame rails they attach to before relying on the hook for anything beyond light recovery.
Load limits apply to the whole chain. The hook, bolts, bumper and recovery strap each have a rated strength, and the lowest rating governs the pull. Pull straight when possible, since angled pulls put side load on the hook and can bend it. Avoid jerking loads, and keep people clear of the line.
Stainless hardware resists corrosion, but it can still gall if tightened dry. Apply a light anti-seize or thread lubricant if your bolt holes allow it, and recheck the fasteners after the first few trail runs. Inspect the hook for bends, cracks at the welds or loosening at the bolts before each trip and after any hard recovery.
Specifications
| Brand | Kentrol |
|---|---|
| Part number | 30538 |
| UPC | 812421021324 |
| Material | 304 stainless steel, virgin metal |
| Color | Stainless steel |
| Maximum load capacity | 5,000 lb |
| Hardware | Stainless steel bolts |
Vehicle fitment
It is a universal fit with no year, make or model tied to it, so bumper style and clearance decide whether the hook works on your vehicle.
Confirm fit for your vehicle’s year, model and trim before ordering. Tube front bumpers need a spacer, and tube bumpers with a risor cannot take the hook as intended.
Installation notes
Use a spacer with a tube front bumper so the hook installs properly. Use the stainless steel bolts supplied, and keep recovery loads within the 5,000 lb maximum. Use it only with recovery gear rated for the load.
What’s included
Stainless steel bolts and hardware are included.
Not included: A spacer for a tube front bumper must be obtained separately before installing the hook.









