Overview
The Smittybilt Contractors Truck Bed Rack, part 18604, is a full-featured lumber rack for pickup trucks. It is made from heavy gauge 2 inch tubing and rated for an 800 lb capacity. It is designed to adjust to full-size trucks in a range of bed lengths and cab configurations.
The rack is finished in textured matte black and is fully adjustable. Its legs and feet adjust for complete customization, and the removable center and rear cross bars make room for extra-tall loads. Built-in tie-downs help secure a wide range of cargo, and gusseted corners add strength and rigidity to the frame.
Smittybilt’s modular design and no-drill brackets allow the rack to be removed for complete bed access in minutes. Permanent installation hardware is included for owners who want the rack to stay on the truck full time, and the air deflector is meant to cut ambient noise.
Key features
- Heavy gauge 2 inch tubing with .120 wall thickness
- Fully adjustable legs and feet
- Removable center and rear cross bars for tall loads
- Built-in tie-downs to secure cargo
- Gusseted corners for strength and rigidity
- Air deflector to reduce ambient noise
- No-drill J-hook brackets or permanent mounting hardware
Loading and securing cargo
A lumber rack is most useful when loads are centered and spread across the cross bars. Place heavy items low and near the front of the rack, then use the built-in tie-downs to secure them against shifting. Keep the load within the rated capacity, and remember that tall loads raise the center of gravity.
Removable center and rear cross bars give room for tall loads, but taking bars off changes how the rack carries weight. Check that every bar is seated and locked before driving, and recheck the tie-downs after the first few miles. Rack hardware should be inspected before heavy hauls, especially on pickups used on rough roads.
- Center heavy items over the cross bars
- Recheck tie-downs after the first stops
- Confirm every bar is locked before driving
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 18604 |
| UPC | 631410086324 |
| Capacity | 800 lb |
| Tubing | 2 inch, .120 wall |
| Finish | Textured matte black |
| Hardware | Gold zinc plated, grade 8 |
Vehicle fitment
It is designed to fit full-size pickup trucks in a range of bed lengths and cab configurations. Check the rack width against your bed and cab before ordering, since the adjustment range determines how well it sits on your truck.
Installation notes
The rack can be installed with the supplied no-drill J-hooks for a removable setup, or with the included permanent hardware for a fixed mount. The permanent option is intended for a full-time work truck.
What’s included
The rack with its adjustable legs, removable cross bars, air deflector, grade 8 hardware, J-hooks and permanent installation hardware.






























