Overview
The S&B Filters 75-5095D is a cold air intake with a dry extendable filter for the 2005–2011 Toyota Tacoma with the 4.0L engine. It fits the Base, Pre Runner and X-Runner trims and is built to minimize air restriction.
The kit provides 65.58% more airflow than the stock intake and carries a 99.37% filter efficiency rating. The fully enclosed airbox keeps the filter away from dirt and engine heat, so the filter draws in cooler air.
The filter is a large, highly efficient element that S&B says results in better performance and helps protect the engine.
Key features
- Dry extendable filter inside a fully enclosed airbox
- 65.58% more airflow than the stock intake
- 99.37% efficiency rating
- Airbox shields the filter from dirt and keeps out engine heat
- Large filter element for higher airflow
- Cold air intake type
- Not for highway use where California emission regulations have been adopted
Dry filter care basics
A dry extendable filter does not use oil, so it is cleaned differently from an oiled element. Most owners inspect the media for dirt buildup and replace the element when it shows tears, heavy staining or a damaged seal, rather than washing it. Avoid tapping or blowing debris back through the media, since that can push fine dust into the pleats and shorten its service life.
Because the filter sits inside a fully enclosed airbox, the airbox lid, gasket and inlet tube connection matter as much as the element. Check the lid latches and clamps after the first few trips, then at regular service intervals. If the vehicle sees heavy dust, shorten the inspection schedule and watch for changes in intake noise, which can signal a leak at a seal or hose.
- Inspect the element for tears and heavy staining
- Replace rather than wash the dry filter
- Check airbox lid latches and gasket seal
- Recheck inlet tube clamps after early trips
Specifications
| Brand | S&B Filters |
|---|---|
| Part number | 75-5095D |
| UPC | 841372037047 |
| Engine | 4.0L |
| Airflow gain | 65.58% more than the stock intake |
| Efficiency rating | 99.37% |
| Filter type | Dry, extendable |
| Filter housing | Full enclosure |
| Intake type | Cold air |
| Fitment type | Direct fit |
| Inlet tube | Included |
| Emissions note | Not legal for highway use in states adopting California emission regulations |
Vehicle fitment
The manufacturer fitment list covers the following vehicle for this kit:
- 2005–2011 Toyota Tacoma (Base, Pre Runner, X-Runner)
Tacoma model years outside 2005–2011, and trims not on the list above, are not shown for this kit. Check your year and trim against the list before installing.
Installation notes
Check your state’s rules before installing. Highway use is not permitted where California emission regulations have been adopted.
What’s included
The inlet tube is included with the kit. Check the package contents for any other parts you need before installing.
















