Overview
The Rugged Ridge Standard Rear Seat in tan, part number 13461.04, is a fixed rear seat for older Jeep CJ models and the 1987-1995 Wrangler YJ. It does not fold or tumble, and it bolts to the floor with minimal drilling.
The seat is built from automotive grade vinyl designed to match the vehicle interior and Rugged Ridge front seats. Its frame and brackets are powder coat painted and welded for a long life. The seat uses the vehicle’s existing seat belts, so no new belt assembly is part of the package.
The tan denim finish is the color offered here. Fixed rear seats stay upright at all times, which is the opposite of the fold and tumble styles in the same brand line, and that is the main reason to pick this one.
Key features
- Fixed, stationary low back design that does not fold
- Automotive grade vinyl designed to match front seats
- Powder coat painted and welded frame and brackets
- Tan denim finish
- Bolts to the floor with minimal drilling
- Uses the vehicle’s existing seat belts
Floor mounting and rust checks
A fixed rear seat bolts directly to the floor, so the condition of the floor determines how solid the seat feels. Before mounting, look under the carpet and along the floor pan for rust, soft metal or previous repairs. Address any damage first so the brackets seat on sound metal.
The seat uses the vehicle’s existing seat belts, so the belt anchors should be checked during installation. Confirm the anchors are tight and free of corrosion, since they carry the load in a collision or sudden stop.
Fixed seats do not fold, so the seat position does not change cargo room. If you need space for gear, consider how the seat fits your load plan before drilling. Keep fasteners and brackets clean and coated to limit future rust at the mounting points.
- Inspect floor metal before bolting down brackets
- Check existing belt anchors for corrosion
- Coat fasteners to limit rust at mount points
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 13461.04 |
| UPC | 804314120450 |
| Seat type | Stationary low back |
| Seat location | Front |
| Position | Rear |
| Color | Tan |
| Finish | Tan denim |
| Frame and brackets | Powder coat painted and welded |
| Mounting | Bolts to floor with minimal drilling |
| Seat belts | Uses existing seat belts |
| Fit type | Direct fit |
Vehicle fitment
It is a direct fit for the Jeep CJ3 (1959-1960, 1966), CJ5 (1959-1960, 1966-1983), CJ6 (1959-1960, 1966-1975), CJ7 (1976-1986), Scrambler (1981-1985), Willys CJ-3 (1955-1958), Willys CJ-5 (1955-1958), Willys CJ-6 (1956-1958) and Wrangler YJ (1987-1995). Several CJ fits are for trims such as Base, Golden Eagle, Laredo, Limited and Renegade.
It is not a fit for the Wrangler TJ, Wrangler LJ, Wrangler JK or Cherokee XJ. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Expect minimal drilling at the floor mounts. Check the floor for rust before bolting down the brackets, and inspect the existing seat belt anchor points while the old seat is out.
What’s included
The fixed rear seat with its frame and brackets.
Not included: seat belts, since the seat uses the vehicle’s existing belts.
