Overview
The Rugged Ridge 15210.81 is a clear replacement HID bulb for 7-inch HID lights, rated 12V, 35W and 4200K, with a 9004 base. It comes as a single bulb.
HID output is 2-1/2 times that of halogen, and the bulb draws 60% less current than a standard 100W fog light. Average bulb life is 2000 hours, compared with 500-1000 hours for halogen. It is universal fit and is not built for one specific vehicle.
Key features
- Clear HID bulb for 7-inch HID lights
- 12V, 35W, 4200K rating
- 9004 bulb base
- Average life of 2000 hours, versus 500-1000 hours for halogen
- Draws 60% less current than a standard 100W fog light
Choosing HID replacement bulbs
HID bulbs run on a ballast rather than drawing power straight from the lamp circuit, so the bulb and ballast need to match as a pair. When replacing one bulb, check that the ballast is in good condition and that the bulb base and color rating suit your lamp housing. Mismatched parts can cause flicker, delayed starts or early failure.
Aiming matters with HID output. A brighter, whiter light reaches farther, so set the beam height after installation to avoid dazzling oncoming drivers. Handle the bulb by its base and keep fingers off the glass, since oils left on the capsule can shorten its life.
- Inspect the ballast and harness for heat damage before fitting a new bulb
- Replace HID bulbs in pairs to keep both sides matched
- Check the lamp housing for cracked lenses or moisture
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15210.81 |
| UPC | 804314218072 |
| Bulb type | HID |
| Lens color | Clear |
| Voltage | 12V |
| Power | 35W |
| Color temperature | 4200K |
| Bulb base type | 9004 |
| Average bulb life | 2000 hours |
| Quantity | Single bulb |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit, so it is not tied to a specific vehicle. It is sized for 7-inch HID lights, so match the lamp size and the 9004 base before installing.
Installation notes
HID bulbs need a ballast that matches the bulb. Check the ballast, harness and wiring against your existing HID setup, confirm it suits a 12V 35W bulb, and disconnect battery power before swapping it.
What’s included
One clear HID replacement bulb.
Not included: Ballast, harness and lamp housing.









