Overview
The Rugged Ridge 13214.53 is a custom-fit set of neoprene front seat covers in black and red, made for 2007–2012 Jeep Wrangler JK vehicles in 2-door and 4-door form. The covers include an airbag flap, which should be lined up with the seat’s airbag location before the covers are used.
Neoprene is a wet suit fabric that resists dirt and water and spares bare legs the burn that hot vinyl seats can cause. Each cover follows the original JK front seat, so the fit looks tailored rather than loose. Elastic cords, nylon straps and hooks secure the covers, and these covers will not fit leather seats.
Key features
- Tailored to the Wrangler JK front seats
- Neoprene wet suit material rather than stretch nylon
- Airbag flap included
- Black and red color
- Elastic cords, nylon straps and hooks for attachment
- Made for 2-door and 4-door models
- Sold as a pair
Airbag flap and seat safety
The airbag flap is the part of the cover that needs the most attention. Before every trip, look at the flap and confirm it sits over the airbag location and does not cover any seam or stitched edge that could restrict deployment. If the flap has shifted after cleaning, re-seat it before driving.
Neoprene is a sturdy material, but it does not breathe the way cloth does. Wipe spills promptly, dry the covers fully and avoid leaving them balled up in a damp Jeep. Over time, the elastic cords lose tension, so check the hooks and tighten the straps when the cover begins to shift.
Consider the rest of the seat setup too. Seat belt buckles and seat adjusters should move freely with the cover in place, and the covers should not bunch under the seat rails. If the neoprene cracks or the stitching separates at the edges, replace the pair so the flap stays in position.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 13214.53 |
| UPC | 804314160241 |
| Material | Neoprene |
| Color | Black/Red |
| Position | Front |
| Airbag flap | Included |
| Body styles | 2-door and 4-door models |
| Leather seats | Not compatible |
| Waterproof | No |
| Quantity | Sold as a pair |
Vehicle fitment
It is fitted to the 2007–2012 Jeep Wrangler (JK) in the 70th Anniversary, Rubicon, Sahara, Sport and X trims, plus the Unlimited versions of those trims. Check your year and trim against these before ordering.
The 2007–2012 range is the Wrangler JK years covered here, so the 2013–2018 JK, 1997–2006 TJ and 2018–2022 JL fall outside it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Start by hooking the elastic cords and hooks to the seat, then connect the nylon straps to the mounting points on each cover. Check that the airbag flap lines up with the seat’s airbag location before you drive.
What’s included
A pair of black and red front seat covers with an airbag flap, plus the elastic cords, nylon straps and hooks for attachment.












