Overview
The Rugged Ridge 11425.08 is a locking black aluminum fuel hatch cover, part number 11425.08. It fits directly over the existing gas cap opening and is a Direct Fit part.
The cover attaches to the original plastic insert with self tapping screws. The plastic insert, tail light and internal gas cover components stay in place, and some drilling is required.
Key features
- Black aluminum construction
- Built-in locking mechanism available
- Fits over the existing gas cap opening
- Attaches with self tapping screws
- No removal of the plastic insert, tail light or internal gas cover components
- Some drilling required
Drilling and lock checks
A locking hatch cover adds security to the filler area, but the lock is only useful when the cover seats well and the fasteners are solid. Because the cover is fixed with self tapping screws into a plastic insert, the screws do most of the work. Check each one after the first few drives, and replace any that strip rather than tightening them further.
Aluminum resists rust better than steel, but it can still scratch and dent, so inspect the edges and mounting area for damage. Before drilling, mark the hole positions with the cover in place, use a smaller pilot hole, and remove every metal chip from the filler area. A clean fit makes the lock easier to operate and helps keep water out.
- Mark holes with the cover held in place
- Clear all metal chips before reassembly
- Recheck screws after the first few drives
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11425.08 |
| UPC | 804314162658 |
| Material | Aluminum |
| Finish | Black aluminum |
| Locking | Yes, built-in mechanism |
| Attachment | Self tapping screws into OE plastic insert |
| Fitment type | Direct Fit |
Vehicle fitment
The 11425.08 is a Direct Fit cover. Check its placement over your vehicle’s gas cap opening before drilling, and confirm your vehicle’s year, model and trim before ordering.
Check the cover’s placement against your vehicle’s gas cap opening before drilling. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is part of this installation, so confirm the cover sits correctly on the opening before any holes are made. The plastic insert, tail light and internal gas cover components stay in place.
What’s included
Confirm whether the self tapping screws and other hardware are included before starting the installation.












